Cart 0

Pressure Accessories (Level)

GE Druck - ACCESSORY PACK for 1800 Series Pressure Sensors (P/N: SO1830E)
STE box, cable clamp, slimline sink weight and a direct calibration adapter for the GE Druck PTX1830 / PTX1835
$ 251.00
GE Druck - Sensor Termination Enclosure (P/N 202-034-05)
Protects the vent tube of gauge pressure submersible level sensors. Enclosure rated IP65, includes a Dry-can desiccant with status indicator, and a Gortex microfilter for venting.
$ 145.00
GE Druck - Dri-Can Desiccant Pack (P/N: 600-914)
Indicates when the desiccant is OK or used. When the color is blue, the desiccant is OK; when it is red, it is time to be replaced. Under normal conditions, the desiccant should be changed every 6 to 12 months.
$ 23.40
GE Druck - PTX Cable Clamp (P/N: 192-373-01)
This clamp secures the submersible pressure sensor cable and prevents the vent tube in the sensor cable from becoming constricted.
$ 41.50
In-Situ - Level BaroTROLL - Precision Pressure Barometer
Accuracy: ±0.05% FS TEB from -5 to 50° C (23 to 122° F). Highly Recommended. Includes mA, ModBus and SDI-12 Outputs. Eliminates the need for an STE (Sensor Termination Enclosure) for maintenance-free operation.
Starting at:
$ 795.00
GE Druck - PTX5072 Pressure Barometer (mA output)
Accuracy: ±0.5% FS TEB from -10 to +50°C (14 to +122°F). Low cost solution. Eliminates the need for an STE (Sensor Termination Enclosure) for maintenance-free operation.
Starting at:
$ 455.00
GE Druck - Sinkweights for 1800 Series (P/N: 222-116-01 and DA2608-1-01)
17.5 mm Diameter Sinkweights for GE Druck 1800 Series Submersible Sensors. Available in two lengths, long and short.
Starting at:
$ 54.00
GE Druck - Sinkweights, 25 mm Diameter (P/N: 222-117-01 and DA4068-1-01)
25 mm (1 inch) Diameter Sinkweights for GE Druck Submersible Pressure Sensors, two types available (short and long)
Starting at:
$ 54.85
GE Druck - Calibration Adaptors for 1800 Series Submersible Pressure Sensors
includes the adaptor with quantity 5 "Dowty" seals for the M14-Female side (submerisble sensor side)
$ 61.50
Electro-Numerics - Micro Series 1/8 DIN Digital Process Meter
The panel meter supplies power to your pressure sensor, and has options for signal re-transmission, output relays, digital interfaces and more. Impressive Update Rate is 60 times per second to the display, and retransmission update rate is 56 times per second (for 60 herz power operation). Meter operates on AC power from 85 to 264Vac.
$ 115.00