Pressure Gauges - Accessories
Accessories are designed to enhance and maintain Trerice Pressure Gauge products.
Product Categories
Trerice - 870 Series Impulse Dampeners
Pressure Impulse Dampeners are designed to improve
readability and prevent wear on delicate gauge mechanisms by
slowing rapid pressure changes and reducing shock and chattering.
Trerice - 872 Pressure Snubbers
Pressure Snubbers are designed to improve
readability and prevent wear on delicate gauge mechanisms by
slowing rapid pressure changes and reducing shock and chattering.
Trerice - 885 Series Coil Syphons
Made of steel, brass, or 304 SS with a 180° coil; used in steam applications, prevents steam from reaching the bourdon tube.
Trerice - 735/740 Series Needle Valves
These valves are of the rising stem type and are designed to shut off the flow of the process media to the pressure gauge. It is recommended to place a needle valve, ball valve or gauge cock in line before every pressure gauge installation.
Trerice - 866 Series Ball Valve
Single entry flow valve, constructed from brass, for use on air, water, oil, and other non-corrosive process media. It is recommended to place a needle valve, ball valve or gauge cock in line before every pressure gauge installation.
Trerice - 865/880 Series Gauge Cocks
Constructed from brass and intended for use on air lines where leakage is not of concern. It is recommended to place a needle valve, ball valve or gauge cock in line before every pressure gauge installation.
Trerice - Test Plugs
Provides a convenient access port for determining process media's pressure and/or temperature in a pipe or vessel. For the body & cap, select from brass or 316SS, and for the inner valve plug material choose either Nordel or Neoprene.
Trerice - Test Kits
Includes a 700B Pressure Gauge with D3747 adaptor, two B82105 Bimetal Thermometers (range1=25 to 125F, Range2=, 20° to 240°F), and a carrying case (test plug is not included).