Calibration Adaptor for 1800 Series Submersible Pressure Sensors

Calibration Adaptor for 1800 Series Submersible Pressure Sensors - OVERVIEW by Druck

For use with the Druck 1800 Series Submersible Pressure Sensor Platform (PTX1830/1835/1840, PDCR1830/1840)

     

    • (DA4112-1-01) M14 x 1.5 Female to G1/8-Male (shown in first photo)
    • (DA4112-2-01) M14 x 1.5 Female to 1/8 NPT-Male (shown in first photo)
      • This adaptor attaches to any of the "Quick Fit" adaptors contained in the adaptor sets IO620-NPT, MET, or BSP, which are used with the more recently introduced models of Druck pressure calibrators (after 2010). Examples are the DPI620Genii, DPI611, and DPI612. 
      • Includes the adaptor with five "Dowty" seals for the M14-Female side, and five "Dowty" seals for the G1/8 or ¼" NPT side.
    • (DA2537-1-01) M14 x 1.5 Female to G1/8-Male (shown in second photo)
    • (DA2536-2-01) M14 x 1.5 Female to 1/8 NPT-Male (shown in second photo)
      • Use this adaptor with older Druck Calibrators (prior to 2010) that use a fixed pressure adaptor, such as the Druck models DPI610/15, DPI605 and others.
      • Includes the adaptor with five "Dowty" seals for the M14-Female side and five "Dowty" seals for the G1/8 or 1/4" NPT. 
      • On all of the adaptors, the female side is M14 x 1.5-Female, which screws onto the standard pressure port on an 1800 Series Submersible Pressure Sensor (with the nose cone removed). They also include five "Dowty" seal washers. The other side of the adaptor is G1/8 on adaptors (DA2536-1-01 & DA4112-1-01), and  ¼" NPT on the others (DA4112-2-01 & DA2536-2-01).