Aqua TROLL 500 / Aqua TROLL 600 / Aqua TROLL 700 / Aqua TROLL 800 - SPARE/EXTRA SENSORS

Aqua TROLL 500 / Aqua TROLL 600 / Aqua TROLL 700 / Aqua TROLL 800 - SPARE/EXTRA SENSORS
by In-Situ

The table below is a list of all the sensor types that plug into the Aqua TROLL 500 and the Aqua TROLL 600 Multiparameter Sondes. Only four sensors fit into the sonde at a time.

Important: These are for replacement only. Use the configured part number for a complete sonde and sensor configuration.

Sensors:


In-Situ - Aqua TROLL pH/ORP Sensor (P/N: 0063470)

The pH/ORP sensor is compatible with the Aqua TROLL 500 and Aqua TROLL 600 multiparameter sondes, featuring a single-junction, three-electrode sensor with refillable reference solution.

 $840.00

In-Situ - Aqua TROLL Temperature and Conductivity Sensor (P/N: 0063460)
This combination water temperature sensor and water conductivity sensor is compatible with the Aqua TROLL 500 and Aqua TROLL 600 multiparameter sondes.

$1070.00

In-Situ - Aqua TROLL RDO Sensor

In-Situ offers two types of "Rugged Dissolved Oxygen" probes:

1) RDO-X (P/N: 0063450): Made for rugged environmental conditions

2) RDO Fast Cap (P/N: 0038520): Made fast responding, for spot checking

$1,220.00

In-Situ - Aqua TROLL Turbidity Sensor (P/N: 0063480)
This turbidity sensor provides consistent, accurate turbidity measurement and total suspended solids (TSS) data, eliminating the need for benchtop turbidity testing.

$1,220.00

Aqua TROLL Ion-Selective Electrode Sensors

There are three Ion-Selective Electrode Sensors available for use with the Aqua TROLL 500 and Aqua TROLL 600:

  1. Ammonium (P/N: 0033700)
  2. Nitrate (P/N: 0033710)
  3. Chloride (P/N: 0033720)
 $790.00 each

In-Situ - Aqua TROLL Aqua TROLL Chlorophyll a Sensor (P/N: 0038900)
This sensor measures chlorophyll a and is compatible with the Aqua TROLL 500 and Aqua Troll 600
$2,035.00

In-Situ - Aqua TROLL Blue Green Algae Sensors
The blue-green algae sensors are compatible with the Aqua TROLL 500 and Aqua TROLL 600.

 $2,035.00

In-Situ - Aqua TROLL Rhodamine WT Sensor (P/N: 0038890)
The Rhodamine WT Sensor is compatible with the Aqua TROLL 500 and Aqua TROLL 600.

 $2,035.00

In-Situ - Aqua TROLL Fluorescein WT Sensor (P/N: 0096050)
The Fluorescein WT Sensor is compatible with the Aqua TROLL 500 and Aqua TROLL 600.

$2,035.00

Aqua TROLL Crude Oil Sensor

In-Situ - Aqua TROLL Crude Oil Sensor (P/N: 0096060)

The Crude Oil Sensor is compatible with the Aqua TROLL 500 and Aqua TROLL 600.

$2,035.00

Aqua TROLL FDOM Sensor

In-Situ - Aqua TROLL FDOM Sensor (P/N: 0096070)
The FDOM Sensor is compatible with the Aqua TROLL 500 and Aqua TROLL 600.

$2,035.00
In-Situ - Aqua TROLL Sensor Port Plug (P/N: 0063510)

The Aqua TROLL 500/600 Port Plug is used in place of a smart sensor on the Aqua TROLL 500/600 Multiparameter Sonde. 		$69.00

Sensor Replacement Kits:


In-Situ - Aqua TROLL RDO-X Cap Replacement Kit (P/N: 0079790)
The RDO-X Sensor Cap Kit has everything you need to replace your expired RDO-X Cap for the Aqua TROLL 600 Multiparameter Sonde and Aqua TROLL 500 Multiparameter Sonde.

Typically, it needs to be replaced every 2 years, depending upon conditions.

$230.00

In-Situ - Aqua TROLL RDO Fast Cap Replacement Kit (P/N: 0066800)
The Aqua TROLL RDO Fast Cap Replacement Kit has everything you need to replace your expired RDO Fast Cap for the Aqua TROLL 500 and Aqua TROLL 600.

Typically, it needs to be replaced every year, depending upon conditions.

$230.00

In-Situ - Aqua TROLL Reference Junction Kit (for pH/ORP and ISE Sensors) (P/N: 0078990)
The Aqua TROLL Reference Junction Kit (for pH/ORP and ISE Sensors) includes 3 junctions and 60 mL of fill solution.

 $175.00
Aqua Troll 500/600/800/900 Wiper Brush Kit

In-Situ - Aqua TROLL 500/600 Wiper Brush Kit (P/N: 0079810)

$32.00