Micro Series 1/8 DIN Digital Process Meter - SPECIFICATIONS

Micro Series 1/8 DIN Digital Process Meter  - SPECIFICATIONS
by Electro-Numerics

General Specifications  (applicable to Micro Series with 0.56″ digits and 1/8 DIN case):

 DISPLAY
Type
7-segment, bright LED digits, red or green
Digit Height
0.56" (14.2 mm)
Number of Digits
  • -99,999 (digital panel meters for analog signals)
  • -999,999 (counters, timers, analog totalizers, remote displays)
  • -999,990 (scale / weigh meter with dummy zero)
LED Indicators

Minus sign, 2 set-points, selectable decimal points

 

Conversion (DPMs)
Technique
Dual slope
Accuracy
  • 16 Bits
  • ±0.1% of full scale ±1 count (typ., DC signals)
A-to-D rate
60/sec at 60 Hz, 50/sec at 50 Hz
Display update rate

3.5/sec at 60 Hz, 3/sec at 50 Hz

 

Conversion (frequency, rate)
Technique
Inverse Period
Frequency Range
0 to 1 MHz
Accuracy
±1 ppm / ºC
Display update rate

3.5/sec at 60 Hz, 3/sec at 50 Hz
Display update rate, max

30 ms + 0-2 signal periods

 

Power
AC Voltage
AC voltage 95-240 Vac ±10% standard, 12-34 Vac optional.
DC voltage
95-370 Vdc standard, 10-48 Vdc optional.
Power consumption
3 W (typ.)
Transducer excitation

3.5/sec at 60 Hz, 3/sec at 50 Hz
Display update rate, max
  • 5 Vdc ± 5%, 100 mA max, 10 Vdc ± 5%, 120 mA max,
  • 24 Vdc ± 5%, 50 mA max

 

Environmental
Enclosure material
Black polycarbonate
Environmental protection
NEMA-4X from front when panel mounted
Operating temperature
0ºC to 55ºC (32ºF to 131ºF)
Storage temperature

-40ºC to 85ºC (-40ºF to 185ºF)

 

Mechanical
Dimensions
See "Case Dimensions & Mounting"
Weight
230 grams (8 oz) typical
Connections (power & data)
Push-in screw clamp connectors at rear of case.