SenSmart 5000 Series Fixed Gas Detector - SPECIFICATIONS
SenSmart 5000 Series Fixed Gas Detector - SPECIFICATIONS
by RC Systems
SenSmart 5100 ==> EC (Electro-Chemical)SenSmart 5200 ==> CAT Combustible (Catalytic Bead)
SenSmart 5300 ==> IR Combustable (Infrared)
SenSmart 5400 ==> IR CO2 (Carbon Dioxide Infrared)
SenSmart 5500 ==> PID (Photo-Ionization Detector)
SenSmart 5600 ==> Analog Input
- Detection Range: Varies with gas type. (see "Detectable-Gases" tab)
- Resolution: 0.01 ppm; 0.1 ppm; 1 ppm; 0.1 %Volume; 1% LEL (depends on gas type)
- Response Time: less than 30 sec. 90% (for most gases)
- Recovery Time: less than 30 sec. 10% (for most gases)
- Temperature Range: -40 deg. C to +50 deg. C (see specific data sheet)
- Humidity Range: 15 - 90% RH, non-condensing (for most gases)
- Zero Drift: less than 1% of full-scale typical (for most gases)
- Power Requirements: 10-30VDC at < 6.5 watts with relay board (all relays energized)
- Housing: Aluminum with epoxy paint standard; Optional #316 stainless steel, Optional Ul94 Poly Black Plastic Enclosure
- Output (standard): 4-20 mA, 3-Wire
- Outputs (optional):
- Two programmable relays plus dedicated FAULT relay
- Dual master / slave MODBUS RS-485 serial interfaces
- Certifications: CSA Certification for:
Class I, Div1, Group A, B, C, D , Class I, Zone 1, Group IIC, T4
Class I, Div 2 Groups A, B, C, D, Class I, Zone 2, Group IIC, T4 - Sensor Service Life: >2 years typical under normal conditions, depends on sensor type and conditions