Cart 0

RC-Systems-SenSmart6000Specifications

RC Systems - SenSmart 6000 Series - Fixed Gas Detector - SPECIFICATIONS

by RC Systems

SenSmart 6100 ==> EC (Electro-Chemical)
SenSmart 6200 ==> CAT Combustible (Catalytic Bead)
SenSmart 6300 ==> IR Combustable (Infrared)
SenSmart 6400 ==> IR CO2 (Carbon Dioxide Infrared)
SenSmart 6500 ==> PID (Photo-Ionization Detector)
SenSmart 6600 ==> Analog Input

  • Accepts Single or Dual Sensors:
    • Channel 1 Input: Electrochemical, Catalytic Bead, Infrared, Photoionization Detector sensor
    • Channel 2 Input: Electrochemical, Infrared , sensor
  • Display:  QVGA backlit color TFT 320x240
  • Detection Range:  Varies with gas type.  (see "Detectable-Gases" tab)
  • Resolution:  0.01 ppm; 0.1 ppm; 1 ppm;  0.1 %Volume; 1% LEL (depends on gas type)
  • Response Time:  less than 30 sec. 90%  (for most gases)
  • Recovery Time:  less than 30 sec. 10% (for most gases)
  • Temperature Range:  -40 deg. C to +50 deg. C (see specific data sheet)
  • Humidity Range:  15 - 90% RH, non-condensing (for most gases)
  • Zero Drift:  less than 1% of full-scale typical (for most gases)
  • Power Requirements:  10-30VDC at < 10 watts with relay board (all relays energized)
  • Housing:  Aluminum with epoxy paint standard; Optional #316 stainless steel, Optional Ul94 Poly Black Plastic Enclosure
  • Output (standard):  Dual 3-wire 4-20mA current source. Max loop Resistance 600 ohms @ 24VDC, Ethernet RJ45 with built-in web Server, Modbus/TCP
  • Outputs (optional):
    • Three programmable relays plus dedicated FAULT relay
    • Dual master / slave MODBUS RS-485 serial interfaces
  • Certifications:
    Cast Aluminum Enclosure:

    Explosion-Proof Cl 1 Div 1 Gr ABCD with 10-0247 (includes sinter)
    Non-Incendive Cl 1 Div 2 Gr ABCD with 10-0247 or 10-0247IS
    UL94 Poly Black Plastic Enclosure:
    Non-Incendive Cl 1 Div 2 Gr ABCD
  • Sensor Service Life:  >2 years typical under normal conditions, depends on sensor type and conditions