RC-Systems-SenSmart6900Specifications
SenSmart 6900 DUAL Gas Detector - SPECIFICATIONS
by RC Systems
SenSmart 6100 ==> EC (Electro-Chemical)
SenSmart 6200 ==> CAT Combustible (Catalytic Bead)
SenSmart 6300 ==> IR Combustable (Infrared)
SenSmart 6400 ==> IR CO2 (Carbon Dioxide Infrared)
SenSmart 6500 ==> PID (Photo-Ionization Detector)
SenSmart 6600 ==> Analog Input
SenSmart 6900 ==> DUAL Gas
- Accepts Single or Dual Sensors:
- Channel 1 Input: Electrochemical, Catalytic Bead, Infrared, Photoionization Detector Sensor
- Channel 2 Input: Electrochemical, Infrared, Sensor
- Display: QVGA backlit color TFT 320x240
- Detection Range: Varies with gas type (see "Detectable-Gases" tab)
- Resolution: 0.01 ppm; 0.1 ppm; 1 ppm; 0.1 %Volume; 1% LEL (depends on gas type)
- Response Time: less than 30 sec. 90% (for most gases)
- Recovery Time: less than 30 sec. 10% (for most gases)
- Temperature Range: -40 deg. C to +50 deg. C (see specific data sheet)
- Humidity Range: 15 - 90% RH, non-condensing (for most gases)
- Zero Drift: less than 1% of full-scale typical (for most gases)
- Power Requirements: 10-30VDC at < 10 watts with relay board (all relays energized)
- Housing: Aluminum with epoxy paint standard. Optional #316 stainless steel. Optional Ul94 Poly Black Plastic Enclosure
- Output (standard): Dual 3-wire 4-20mA current source. Max loop Resistance 600 ohms @ 24VDC, Ethernet RJ45 with built-in web Server, Modbus/TCP
- Outputs (optional):
- Three programmable relays plus dedicated FAULT relay
- Dual master / slave MODBUS RS-485 serial interfaces
- Certifications:
- Cast Aluminum Enclosure
- Explosion-Proof Cl 1 Div 1 Gr ABCD with 10-0247 (includes sinter)
- Non-Incendive Cl 1 Div 2 Gr ABCD with 10-0247 or 10-0247IS
- UL94 Poly Black Plastic Enclosure
- Non-Incendive Cl 1 Div 2 Gr ABCD
- Sensor Service Life: >2 years typical under normal conditions, depends on sensor type and conditions