Explosion Proof RTD Sensors - OVERVIEW

Explosion Proof RTD Sensors - OVERVIEW
by Pyromation

(XP01) Hazardous Location Explosion-Proof Approved Fixed-Element RTD Assemblies:

Explosion-Proof, Fixed-Element RTDs are made for use in U.S. and Canadian hazardous areas. They are designed to extinguish flames inside the device, eliminating the potential for the ignition of flammable mixtures in the surrounding atmosphere. FM and CSA approved assemblies, dependent on connection head type, meet XP Class I Division I & II; Groups A, B, C, and D; DIP Class II Division I; Groups E, F, and G; Class III; Type 4/4X. They may be installed directly into the process without being inserted into a thermowell. The assemblies feature 316 stainless steel sheaths in various diameter sizes. They are available with or without process mountings and with aluminum or stainless steel explosion-proof connection heads.

(XP03) Hazardous Location Explosion-Proof Approved RTD Assemblies with Thermowells:

Explosion-Proof RTD Assemblies with Thermowells are made for use in U.S. and Canadian hazardous areas. They are designed to extinguish flames inside the device, eliminating the potential for the ignition of flammable mixtures in the surrounding atmosphere. FM and CSA approved assemblies, depending on connection head type, meet XP Class I Division I & II; Groups A, B, C, and D; DIP Class II Division I; Groups E, F, G; Class III; Type 4/4X. The required thermowell is available in standard, heavy-duty, and flanged constructions. The assemblies feature 316 stainless steel sheaths. They are available with aluminum or stainless steel explosion-proof connection heads.

(XP05) Hazardous Location Explosion-Proof Approved, Spring-Loaded RTD Assemblies:

Explosion-Proof, Spring-Loaded RTDs are made for use in U.S. and Canadian hazardous areas. They are designed to extinguish flames inside the device, eliminating the potential for the ignition of flammable mixtures in the surrounding atmosphere. FM and CSA approved assemblies, depending on connection head type, meet XP Class I Division I & II; Groups B, C, and D; DIP Class II Division I; Groups E, F, and G; Class III; Type 4/4X. Pyromation provides sensors for installation into your existing thermowell or provides the required thermowell as part of the assembly. Refer to the Thermowell Section of this catalog for product selection. The assemblies feature 316 stainless steel sheaths. They are available with aluminum or stainless steel explosion-proof connection heads. Note: The "S" dimension will measure 1/4" longer than specified when the spring is in the relaxed position. The "S" dimension is calculated when the sensor is compressed or in the installed position. This design allows 1/4" spring compression to ensure positive contact with the bottom of the thermowell.