TekDP1640ASpecifications
Tek-DP 1640A Series Venturi Flow Meter - SPECIFICATIONS
by Tek-Trol
| Venturi Meter for normal liquids | |
| Material | All standard materials available |
| Tap Connections | Two 1⁄2″ NPT per side standard, Flanged, Socket-Welded, Butt-Welded, Valves |
| Venturi Tube Sizes | 1″ to 48″, Custom size available on order, Flanged, Socket-Welded, Butt Welded Valves |
| Turn Down Ratio | 10:1 Standard |
| Beta Ratio | Typically, β 0.4 to 0.75 |
| End Connection | #150 – #2500 RF/RTJ, SO/WN Flanges or Beveled ends |
| Operating Temperature | Standard at -20° to 100° F, optional -40° to 1200° F |
| Operating Position | Vertical, Horizontal (any orientations for liquids only) |
| Process products | Liquids, Liquid Hydrocarbons, Cryogenics |
| Assembly Type | Flange, Weld in, Insertion type |
| Venturi Meters for wet and dry gas | |
| Material | All standard materials available (See model chart) |
| Tap Connections | Three 1⁄2″ NPT standard, Flanged end, Socket welded, Butt welded, Valves |
| Venturi Tube Sizes | 1″ to 48″, Custom size available on order , Flange, Weld in, Insertion type |
| Turn Down Ratio | 10:1 Standard |
| Beta Ratio | Typically, β 0.4 to 0.75 |
| End Connection | #150 – #2500 RF/RTJ, SO/WN Flanges or Beveled ends |
| Operating Temperature | Standard at -20° to 100° F, optional -40° to 1200° F |
| Operating Position | Vertical, Horizontal, Hydrocarbon Wet Gases, Steam, (other orientations available) |
| Process products | Natural Gases, Steam |
| Assembly Type | Flange, Weld in, Insertion type |