E+E - EE220 Humidity and Temperature Transmitter

EE220 Humidity and Temperature Transmitter - OVERVIEW
by E+E Elektronik

Key Features:

• Intelligent, interchangeable probes
• Separate probes for RH and T
• Highest RH and T measurement accuracy (EE07 Probe):
• Humidity: ±2 % RH (0...90 % RH) ±3 % RH (90...100 % RH)
• Temperature: at 20 °C (68 °F): ±0.1 °C (±0.18 °F)
• Outstanding long term stability
• RH sensor protection by E+E proprietary coating
• Suitable for loop calibration in FDA regulated industries
• Probe extension cable up to 10m
• Two analogue outputs
• LCD display
• Reference probes for function and accuracy check
• Rail installation according to DIN EN 50022
• Duct mounting kit

Typical Applications:

• Pharma, biotech
• Incubators and clean rooms
• Cool chambers
• Storage rooms

EE220 Humidity and Temperature Transmitter - DESCRIPTION
by E+E Elektronik

The EE220 Humidity and Temperature Transmitter with pluggable, interchangeable probes is optimized for cleanroom, food, and

pharmaceutical industries.

The EE220 basis unit can accommodate one combined EE07 RH and T probe or two separate EE07 probes, one for RH and one for T. The probes can be plugged onto the basis unit either directly, or with M12 extension cables up to 10m (32.8ft) long. A loop calibration or adjustment in the field, as required by the FDA (Food and Drug Administration) regulated industries, is easily possible for the EE220 with two separate probes.

The EE220 basis unit is available with polycarbonate or with a metal enclosure, appropriate and suitable for wall mount or for installation on rails (DIN EN 50022). An optional kit facilitates the mounting of the probe in a duct.

For surface moisture monitoring or for the early detection of condensation danger, EE220 can accommodate the EE03 RH & T module (see data sheet EE03).

The E+E proprietary coating protects the humidity sensors against corrosion and dirt, which leads to best long-term stability even in harsh environments.

EE220 Humidity and Temperature Transmitter - DOCUMENTATION
by E+E Elektronik

EE220 Humidity and Temperature Transmitter - ACCESSORIES
by E+E Elektronik

ACCESSORIES

Please consider these optional accessories.

	E+E Elektronik - EE07 Interchangeable Sensor Probes for Series EE220 Humidity and Temperature probe Temperature only probe available Low power versions Polycarbonate or metal housing Filters available are membrane, PTFE, metal grid, H2O2	Starting at: $256.00
	E+E Elektronik - Duct Mounting Kit for EE07 Probe (P/N: HA010209) Duct mounting kit for the EE220 Series	$253.00
	E+E Elektronik - Connection Cable for EE07/EE220/EE244 (P/N: HA010801-03) Connects the EE07 to the EE220, available in 2, 5 and 10 meter lengths.	Starting at: $95.00
	E+E Elektronik - Bracket for DIN-Rail Mounting (P/N: HA010203) This DIN-Rail mounting bracket is suitable only for the polycarbonate (plastic) enclosures, and two pieces required per device. Used on models EE220, EE23, EE310, and EE360.	$13.00
	E+E Elektronik - Power Supply Adapter (P/N: V03) External power supply 100-240 V AC / 50-60 Hz 0.5 A Suitable for Europe / US / UK / Korea / China	$209.00
	E+E Elektronik - Test Probes for EE220 (P/N: HA010403) EE07 probes with fix output values for checking the EE220 basic unit (test report included) probe 1: 90 % RH / 5 °C (41 °F) probe 2: 10 % RH / 45 °C (113 °F)	$540.00

EE060 Humidity and Temperature Probe with Voltage Output - CALIBRATION
by E+E Elektronik

Calibration intervals for E+E Elektronik humidity and temperature sensor products occurs once per year. SensorPros recommends the calibration equipment listed in the table below for following E+E product collections: Humidity-for Process Control, Humidity-Modules & Probes AND Humidity-HVAC Transmitters

Calibration of your E+E Elektronik Relative Humidity Sensors depends on the application and accuracy of the sensor model you have.

	E+E - Humidity Calibration Kit (P/N: HA010400-HA011595) The E+E Humidity Calibration Kit is a cost effective solution for calibrating humidity measuring instruments with sensing probes Ø 10-12 mm (0.4-0.47 inch). It is very easy to use and does not require a highly qualified technical staff. The kit consists of a humidity calibration chamber and a choice of E+E Humidity Standard Sets.	Starting at: $89.00
	Edgetech Instruments - Portable Calibrator - %RH, Dew Point, Temperature (P/N: RH-CAL) Features: Edgetech field proven Optical Chilled Mirror (OCM) technology Completely self-sufficient and portable humidity calibration system Highest accuracy available for both Relative Humidity (RH) and Ambient Temperature (AT): RH Accuracy: ± 0.5% over RH Range: 5% to 95% AT Accuracy: ± 0.2°C over AT Range: 10°C to 50°C Test chamber is temperature and RH controlled independently Accepts standard port sizes for RH probes: 10, 12, 18 mm, 1/2, and 3/4 inch diameter Automatic correction for mirror contaminants Certified measurements against NIST traceable standards Excellent software is available to automate your calibration process	$15,750.00
	E+E - High-precision Humidity Calibrator (P/N: HUMOR 20) Features: Highest accuracy reference device (0.3 - 0.9% RH) Fundamental dual pressure reactor principle Range: 10...95% RH Independent from the ambient temperature Very fast stabilization time: < 3 min/measuring point Automatic multiple point calibration cycles Portable	Starting at: $35,963.00

E+E Elektronik - PRODUCT CONFIGURATION - NOTES

1. Please configure your model number by pressing the "Configure Options" button.
2. After configuration, press the "Add to Cart" button to enter the shopping cart, and then either:

• Select the "Check Out" button to purchase online, OR
• Select the "Request a Quote" button and we will send you a formal quote within 1 business day or less.