Flow-Measurement
Product Categories

The Tek-Flux 1400C Utility Electromagnetic Flow Meter is available as Line or Battery powered and is NSF approved, allowing for use in potable (drinking) water applications.

For use in pipes from 4″ to 80″, adjustable depth (isolation valve included), no moving parts, and multiple signal outputs.

Measures the volumetric flow rates of any fluid which can adequately conduct electricity in closed pipelines. These instruments are highly accurate, reliable, and stable devices used in various high-pressure industrial processes. Available in a wide range of nominal pipe size diameters, from ½” to 28″ (0.04 ft to 2.33 ft) with IP65 protection.

It is a perfect application for water treatment, storage tanks, open basins, pump/lift stations, sewer management rain overflow basins, and level monitoring.

The flangeless design makes it an economical, compact, and lightweight alternative to flanged magnetic flowmeters. Choose from a wide range of rugged liner and electrode material options compatible with virtually all applications, from highly corrosive liquids to fibrous slurries often considered difficult to measure with other devices. For easy installation, alignment spacer kits are provided with every 8711 flowmeter to center the sensor in the process line.

Ideal for measuring water and wastewater flows, it is available in 1/2in (15mm) to 48in (1200mm) line sizes. The all-welded construction provides a hermetic seal protecting against moisture ingress and other contaminants and includes a removable and replaceable terminal block allowing easy maintenance and repair in the field.

Available in 1/2- to 36-inch line sizes, the all-welded construction provides a hermetic seal protecting against moisture ingress and other contaminants. A nice feature: a removable and replaceable terminal block allowing easy maintenance and repair in the field, negating the need to replace the entire flowmeter.

A primary flow meter for measuring gas, liquid, and vapors flowing in the pipelines and ducts based on principles of differential pressure measurement (DP). Suitable for a wide range of pipe sizes. Allows insertion into pressurized pipes (Via a full port Valve and hot tap).

Ideal for liquid, steam, and gas media, used in rugged conditions where accuracy, low maintenance, and cost are important. With its DP built-in flow conditioning design, the Cone is great in tight-fit and retrofit installations where the long runs of straight pipe required by Orifice Plates, Venturi Tubes, and other technologies are impractical or unavailable.

Utilizes two different flow meter technologies in combination; vortex and differential pressure. This allows for predicting the fluid density, volumetric flow rate, and mass flow rate without any fluid density information being required from an external source.

Available in various line sizes (1/2″ to 24″) and meets ASME, AGA, and ISO Standards. The primary applications for the Tek-DP 1610H Wafer Style Orifice Plate are for gases, liquids, corrosive, and high-temperature fluids.

Used in combination with a multivariable transmitter to measure liquid, gas, or steam flow accurately.

Compact design, measures mass flow and standard flow directly, accuracy ±0.5% FS, specially designed for use in air and nitrogen (N2) applications.

A versatile instrument that calculates the mass flow, volumetric flow rate, temperature, pressure, and density of any liquid, gas, or steam through a pipeline.

A 26GHz high-frequency radar-type level measuring instrument measuring up to 90 feet. This high-frequency radar transmitter is best for measuring solids and low dielectric constant medium. Easy to install with a horn that fits in a 2” NPT.

Designed to measure almost any fluid across any application, and does not require compensations for factors such as temperature and pressure, which impact volume and, in turn, impact the accuracy of measurement.

Designed to measure almost any fluid across any application, and does not require compensations for factors such as temperature and pressure, which impact volume and, in turn, impact the accuracy of measurement.

Monitors inputs ranging from flumes and weirs, water quality sensors and rainfall gauges, drinking water flows (leak detection), and weather stations.

Monitors inputs as diverse as irrigation flows, farm wastewater flows, water quality, dam levels, soil moisture, and pump/engine management systems.

Waterproof, high performance battery operated open channel flow monitoring solution for wastewater, stormwater and industrial discharge applications.