Products
Product Categories
TEK-TROL - Tek-Bar 3800XA Explosion-Proof Multivariable Transmitter
Capable of measuring three separate process variables at the same time and provides the option of calculating the following values: 1) Mass flow for gases, steam, and liquids, 2) Standard volume flow for gases using dynamic compensation, 3) Heat flow for water and steam and 4) Drum water level and level measurement with density compensation of liquids.
TEK-TROL - Tek-Bar 3110A Series - Differential Pressure Transmitter
Explosion-Proof (FM (Class I Div I), Pressure Ranges from 0-6" WC up to 0-300 psi gauge, absolute or differential, 100:1 turndown capability, and accuracy 0.075% of URL (0.04% optional). 4-20 mA HART®️ output standard (optional Modbus).
TEK-TROL - Tek-Sub 4800B Submersible Level Transmitter
The piezoresistive silicon sensor is enclosed in a 304 SS housing, a diameter of 1.06 inches (27 mm), and accuracy (+/-0.5% FS). It operates on 12-36 VDC power, and available signal outputs are 4-20 mA, 0.5-4.5 VDC, or RS-485.
TEK-TROL Tek-Hydro 4500A-G Gauge Pressure Level Transmitter
Used with a wide range of liquids, including corrosive, non-corrosive, and abrasive liquids and slurries in tanks of any size. It can handle broad temperature and pressure ranges under different process conditions. It also measures other parameters, such as the flow rate and density. Maximum pressure up to 8700PSI.
TEK-TROL - Tek-Hydro 4500A-D Differential Pressure Level Transmitter
Measures hydrostatic pressure head and converts into a liquid level. It is used to measure not only the liquid level but also other parameters such as the flow rate and density. This transmitter has a maximum pressure up to 1000PSI.
TEK-TROL - Tek-Wave 4300A Radar Level Transmitter
The Tek-Wave 4300A is anexplosion-proof, and it does not come in contact with the media. It can also be used to measure levels of corrosive, viscous, and abrasive materials without suffering any damage.
TEK-TROL - Tek-Flux 4100B Two-Wire TDR OEM Level Transmitter
Measures distance, level, volume, and mass of liquids, solids. It is an affordable solution for applications that do not require a high level of accuracy and is an excellent alternative to traditional level controls such as RF Capacitance, conductive, and DP transmitters.
TEK-TROL - Tek-Flex 4100A Guided Wave Radar Level Transmitter
An Explosion-Proof, 2-wire guided radar level transmitter based on the Time Domain Reflectometry (TDR) technology. It measures distance, level, mass, and volume of liquids, pastes, and slurries.
TEK-TROL - Tek-DP 1650A DProbar Multiport Self-Averaging Flow Meter
A primary flow meter for measuring gas, liquid, and vapors flowing in the pipelines and ducts based on principles of differential pressure measurement (DP). Suitable for a wide range of pipe sizes. Allows insertion into pressurized pipes (Via a full port Valve and hot tap).
TEK-TROL - Tek-DP 1620A Series Cone Flow Meter
Ideal for liquid, steam, and gas media, used in rugged conditions where accuracy, low maintenance, and cost are important. With its DP built-in flow conditioning design, the Cone is great in tight-fit and retrofit installations where the long runs of straight pipe required by Orifice Plates, Venturi Tubes, and other technologies are impractical or unavailable.
TEK-TROL - Tek-Flo 1300D Steam Quality Mass Flow Meter
Utilizes two different flow meter technologies in combination; vortex and differential pressure. This allows for predicting the fluid density, volumetric flow rate, and mass flow rate without any fluid density information being required from an external source.
TEK-TROL - Tek-DP 1610H Series Wafer Style Orifice Plate
Available in various line sizes (1/2″ to 24″) and meets ASME, AGA, and ISO Standards. The primary applications for the Tek-DP 1610H Wafer Style Orifice Plate are for gases, liquids, corrosive, and high-temperature fluids.
TEK-TROL - Tek-DP 1610D Series Integral Orifice Assemblies
Used in combination with a multivariable transmitter to measure liquid, gas, or steam flow accurately.
TEK-TROL - Tek-Flux 1400B Insertion Electromagnetic Flow Meter
For use in pipes from 4″ to 80″, adjustable depth (isolation valve included), no moving parts, and multiple signal outputs.
TEK-TROL - Tek-Flux 1400A Electromagnetic Flow Meter
Measures the volumetric flow rates of any fluid which can adequately conduct electricity in closed pipelines. These instruments are highly accurate, reliable, and stable devices used in various high-pressure industrial processes. Available in a wide range of nominal pipe size diameters, from ½” to 28″ (0.04 ft to 2.33 ft) with IP65 protection.
TEK-TROL - Tek-Vor 1300C Vortex Flow Meter
A versatile instrument that calculates the mass flow, volumetric flow rate, temperature, pressure, and density of any liquid, gas, or steam through a pipeline.
TEK-TROL - Tek-Wave 4300C Radar Level Transmitter
A 26GHz high-frequency radar-type level measuring instrument measuring up to 90 feet. This high-frequency radar transmitter is best for measuring solids and low dielectric constant medium. Easy to install with a horn that fits in a 2” NPT.
Shaw - Service Kit (P/N: SADP Service Kit)
Desiccant, sensor grommet, head seal, seal lubricant, alan key and (6) VARTA batteries, for SADP Series Hygrometers.
TEK-TROL - Tek-Bar 3110B Differential Pressure Transmitter
Ranges from 0-24" WC up to 0-1450 psi differential, 20:1 turndown capability, and accuracy 0.075% of URL. 4-20 mA HART®️ output (optional 1-5 VDC or Modbus). Options for IP68 water-proof and CSA Class 1 Div 1 Explosion Proof.