Products
Product Categories
TRERICE - 750 Series Process Gauge (Stainless Steel Case)
This solid front/blow-out back gauge features a stainless steel case and ring. Its sturdy interior design and field liquid-fill capability (no kit required) provide the durability, accuracy and safety required for industrial process applications. Wetted parts are stainless steel or Monel.
TRERICE - Gas/Water Test Gauges
It is an integral tools for passing building inspections.
Shaw - Pressure Regulator (PRV Series)
Model PRV, pressure regulator, is used for accurate control of pressure at all important points in a sample system. Two regulators are available for maximum inlet pressures of 200 bar (3000 psi) and 400 bar (6000 psi).
Shaw - Superdew 3 Hygrometer Display
Single-channel inline hygrometer housed in a panel-mounted IP54 enclosure), is designed to measure dewpoint in process gases and compressed air. Connects to the "The SHAW Moisture Sensor" (and not the Acudew or SDH-Ex).
TEK-TROL - Tek-DP 1640A Series Venturi Flow Meter
Designed to measure almost any fluid across any application, and does not require compensations for factors such as temperature and pressure, which impact volume and, in turn, impact the accuracy of measurement.
TEK-TROL - Tek-Cor 1100A Coriolis Flow Meter
Designed to measure almost any fluid across any application, and does not require compensations for factors such as temperature and pressure, which impact volume and, in turn, impact the accuracy of measurement.
Shaw - Filter Unit (P/N: FILTER)
An effective device for removing particulate contamination from sample gases.
Shaw - SWS-SD3 Weatherproof Gas and Air Sample System
Designed for gas or general compressed air sampling and allows the dewpoint sensor to be operated at ideal sampling conditions. Housed in an IP65 weatherproof cabinet, it combines pressure regulation, filtration, and flow control.
Shaw - AcuTrak Inline Hygrometer Display
Fully self-contained, single-channel, inline hygrometer, same features as the AcuVu except adds RS485 capability. Select either the Shaw SDH-EX or AcuDew dew point transmitters (sensor is add-on purchase).
Shaw - Dew Point Sensor Holder
Made from solid stainless steel and fits the SE "Shaw Dew Point Sensor", the AcuDew, and the SDT-Ex. The unit has a design pressure rating of 400 bar (6000 psi) and can be supplied oxygen cleaned if required.
Shaw - Signal Isolator
Zener Barrier Unit (signal isolator), shunt diode safety barrier, is used for inline applications in potentially hazardous areas or where there is a high risk of fire or explosion and comes in a custom enclosure.
Shaw - SU4 Dew Point Sample System
Simple to set up and install, it consists of a stainless steel pressure regulator, flow meter, and sensor holder mounted on a powder-coated backplate.
TEK-TROL - Tek-Bar 3120B - Gauge Pressure Transmitter
Ranges from 0-5 up to 0-10,000 psi gauge or absolute, 20:1 turndown capability, and accuracy 0.075% of URL (optional +/-0.04%). 4-20 mA HART®️ output (optional 1-5 VDC or Modbus). Options for IP68 water-proof and CSA Class 1 Div 1 Explosion Proof.
Shaw - SU2 Dew Point Sample System
Top-mounted on the SADP or SADP-P. Ensures the sample pressure and flow are suitable for quick and accurate dew point measurements in gases and dry compressed air. Sample system does not include the SADP or SADP-P.
TRERICE - 238TSC Tri-Clamp Flush Mount Pressure Transmitter
Tri-Clamp Process Connections (1 1/2 or 2 inches), Ranges from 0-10 PSI through 0 to 600 psi gauge, 4:1 Turndown, 4-20 mA and 0-10Vdc Outputs; Accuracy +/- 0.35% BFSL, 316L Stainless Steel wetted parts,
TRERICE - 235TFC Flush Connection Pressure Transmitter
Ranges from 0-10 PSI through 0 to 800 psi gauge, 4:1 Turndown, 4-20 mA and 0-10Vdc Outputs; Accuracy +/- 0.35% BFSL, 316L Stainless Steel wetted parts,
TRERICE - 227THT High Temperature Pressure Transmitter
Continuous Process temperatures up to 320°F/160°C, Ranges from 30" Hg vacuum up to 0 to 15000 PSIG, Accuracy +/-0.35% BFSL, 17-4 PH SS wetted parts, 4-20 mA or 0-10Vdc Outputs.
TRERICE - 222THP High Pressure Transmitter
Ranges from 0 to 20,000 PSI through 0 to 60,000 PSI Sealed Gauge, Accuracy +/- 0.35% BFSL, Select either 4-20mA or 0-10Vdc Output Signal, Stainless Steel body, 17-4 PH SS wetted parts
TRERICE - 700SS / 700LFSS Pressure Gauge (SS Internals, Back Mount)
316 SS Tube/Socket, Dry (700SS) or Liquid Filled (700LFSS), field fillable, Dial Sizes: 2.5, 4, & 6 inches, laminated safety glass window, 304 SS Case, Accuracy: +/-1 % FS
TRERICE - Flange-Mounted Diaphragm Seals
Clean-out design, Flushing Connection Available, ANSI Raised Face Flanged Process Connection