Druck - Sink Weights for 1800 Series (P/N: DA2608-1-01 and DA4068-1-01)
Sinkweights for 1800 Series Submersible Pressure Sensors. Available in two lengths, long (17.5 mm diameter) and short (25 mm diameter).
Sinkweights for 1800 Series (P/N: DA2608-1-01 and DA4068-1-01) - OVERVIEW
by Druck
Sinkweights for Druck 1800 Series Submersible Pressure Sensors are available in two lengths, long and short.
P/N: DA2608-1-01: Total length is 8 inches long and includes adaptor P/N: 222-119-01, enabling the sink weight to screw onto the 1800 Series Sensor. It is an accessory with the Druck 1800 Series Submersible Pressure Level Sensors (PTX1830/PTX1835, PTX1840/PTX1845, PDCR1830, PDCR1840).
P/N DA4068-1-01: Short sink weight, 25 mm diameter is an accessory with the Druck 1800 Series Submersible Pressure Level Sensors (PTX1830/PTX1835, PTX1840/PTX1845, PDCR1830, PDCR1840) and UNIK5000 submersibles (PTX5032/PTX5042, etc.).
Share this Product
More from this collection
Druck - DPI610E Series Hand-held Pressure Calibrator
The DPI610E handheld pressure calibrator is the latest and the sixth generation of the DPI600 family. Capable of measuring pneumatic pressures from 95% vacuum to 500psi (35bar) and hydraulic pressures up to 15,000psi 1,000bar).
Druck - PV624 Portable Pressure Controller (PV62X + PM620 + DPI620GENii)
The PV624 is capable of generating pressures up to 300 psi (20 bar), and when combined with a multifunction calibrator from the DPI620GENii family and a PM620 Pressure Module, you have a portable calibration system. Choose a pressure range from ±1 psig on up to 0 to 300 psi gauge or absolute, with uncertainty from 0.025% span. Use the hand pump to manually generate pressures before the PV624 automatically isolates the hand pump and seamlessly engages the fully automatic pressure generation to your setpoint.
Druck - PV624 Portable Low Pressure Controller (PV624 + PM620LP + DPI620GENii)
The PV624 is capable of automatically generating low differential pressures. When combined with a multifunction calibrator from the DPI620GENii family and a PM620LP Low Pressure Module, you have a portable low pressure calibration system. Choose from full scale ranges of ±2.5 mbar (1 inH2O), ±10 mbar (5 inH20), or ±25 mbar (1 to 10 inH2O), with total uncertainty from 0.05% span.
Druck - PM620LP - Low Pressure Modules
Used with the PV624 pressure controller. Ranges from 2.5 mbar diff to 25 mbar diff (1 to 10 inH2O diff), with total uncertainty from 0.05% Span. The PM620LP has a true differential measurement via a fitted barbed low pressure (LP) connector and is supplied with 1 x barbed high pressure (HP) connector to fit a PV624 test port, 1 x equalizing valve, and 1M (3.3 ft) length of silicon twin tubing.