Submersible Pressure Level Accessories
Submersible Pressure Level Accessories include clamps, sink weights, adaptors, barometers, meters and more to protect and maintain Druck Submersible Pressure Level Sensors.
Product Categories
Druck - ACCESSORY PACK for 1800 Series Pressure Sensors (P/N: SO1830E)
STE box, cable clamp, slimline sink weight and a direct calibration adapter for Druck 1800 Series Submersible Pressure Level Sensors
Druck - Sensor Termination Enclosure (P/N: 202-034-05)
Protects the vent tube of gauge pressure submersible level sensors. Enclosure rated IP65, includes a Dry-can desiccant with status indicator, and a Gortex microfilter for venting.
Druck - Nose Cone for PDCR/PTX1830 (P/N: 222-127-01)
Attaches to the 1800 Series Submersible Pressure/Level Sensors (PTX1830/PTX1835/PTX1840/PTX1845 and PDCR1830/PDCR1840).
Druck - Cable Clamp (P/N: 192-373-01)
This clamp secures the submersible pressure sensor cable and prevents the vent tube in the sensor cable from becoming constricted.
Druck - Sink Weights for 1800 Series (P/N: DA2608-1-01 and DA4068-1-01)
Sinkweights for 1800 Series Submersible Pressure Sensors. Available in two lengths, long (17.5 mm diameter) and short (25 mm diameter).
Druck - Dri-Can Desiccant Pack (P/N: 600-914)
Used with the STE Box; Protects a Submersible Pressure Level Sensor from damage caused by moisture or high humidity
Druck - Calibration Adaptors for 1800 Series Submersible Pressure Sensors
includes the adaptor with quantity 5 "Dowty" seals for the M14-Female side (submerisble sensor side)
Druck - Calibration Adaptors for 25 mm (1 inch) Diameter Sensors
Calibration Adaptors for 25 mm (1 inch) Diameter Pressure Sensors: G1/4-Male to 1/8 NPT Male (DA2536-2-01) and G1/4-Male to G1/8
Electro-Numerics - Micro Series 1/8 DIN Digital Process Meter
The panel meter supplies power to your pressure sensor, and has options for signal re-transmission, output relays, digital interfaces and more. Impressive Update Rate is 60 times per second to the display, and retransmission update rate is 56 times per second (for 60 herz power operation). Meter operates on AC power from 85 to 264Vac.
In-Situ - Level BaroTROLL Precision Pressure Barometer
Accuracy: ±0.05% FS TEB from -5 to 50° C (23 to 122° F). Highly Recommended. Includes mA, ModBus and SDI-12 Outputs. Eliminates the need for an STE (Sensor Termination Enclosure) for maintenance-free operation.
Druck - Sink Weight for 25 mm Diameter Sensors (P/N: 222-117-01)
Sink weight for 25 mm Diameter Submersible Pressure Sensors (Druck UNIK5000 Series: 503X, 504X, 50NX).