Tek-Trol Tek-Clamp 1200A-100H Hand Held Ultrasonic Flowmeter
Tek-Clamp 1200A-100H has a built-in data logger capable of storing over 2000 data points (optional). The pair of transducers used are capable of measuring flow rates in pipes from ½" to 28" at temperatures of between 32 °F (0 °C) to 320 °F (160 °C).
Tek-Trol Tek-Clamp 1200A-100H Hand Held Ultrasonic Flowmeter
Tek-Clamp 1200A-100H has a built-in data logger capable of storing over 2000 data points (optional). The pair of transducers used are capable of measuring flow rates in pipes from ½" to 28" at temperatures of between 32 °F (0 °C) to 320 °F (160 °C).
TEK-CLAMP 1200A-100H Hand Held Ultrasonic Flowmeter - OVERVIEW
by Tek-Trol
Tek-Clamp 1200A-100H is a non-invasive ultrasonic flow meter that uses an ultrasonic signal to measure the flow rate with the transit time method. The unit has a built-in data logger capable of storing over 2000 data points. The pair of transducers used are capable of measuring flow rates in pipes from ½" to 28" at temperatures of between 32 °F (0 °C) to 320 °F (160 °C).
Model Number OVERVIEW:
PARAMETER | Tek-Clamp 1200A-100H |
---|---|
Accuracy |
+/-1% of reading at rates >0.2 mps |
LCD Display | 4×16 LCD Display |
Size | Pipe diameters from ½” to 200″ |
Protection Category | Clamp-on IP65 sensors |
Output Signal | None |
Power Supply | 90-230 VAC power supply, Ni-MH battery operation for over 12 hours |
Keypad | – |
Share this Product
More from this collection

Tek-Clamp 1200A-100EXP is a Class I Div ll Ultrasonic Flow Meter. Completely non-invasive ultrasonic flow
meter that uses an ultrasonic signal to measure the flow rates with the transit time method.

The wall-mounted version of the 1200A Ultrasonic Flow Meter is designed to measure the fluid velocity of liquid in a full or closed pipe using three approaches: Clamp-on, flow-cell, and insertion for pipe diameters from 1/2 inch to 200 inches, with accuracy better than ±1% of reading.

Utilizes two different flow meter technologies in combination; vortex and differential pressure. This allows for predicting the fluid density, volumetric flow rate, and mass flow rate without any fluid density information being required from an external source.

Gauge Mounting Block for EE741 Flowmeter. Mate your EE741 with your pipe size. Available in Aluminum, Stainless Steel, SS Oxygen clean, and SS Flanged versions.