Druck - PACE5000 Single Channel Modular Pressure Controller Chassis

Druck - CM0 PACE Control Module - Standard Accuracy

Accuracy is +/-0.02% full scale plus +/-0.02% reading. It fits into the interior back of the PACE5000 and PACE6000 system chassis, providing interchangeability.

The product is available with a barometer (CM0-B), which enables both gauge and absolute pressure control/measure, or without a barometer (CM0), which only provides gauge pressure control/measure.

Druck - CM1 PACE Control Module - High Accuracy

Accuracy is +/-0.01% full scale plus +/-0.01% reading. It fits into the interior back of the PACE5000 and PACE6000 system chassis, providing interchangeability.

It can be used with a barometer (CM1-B) to control and measure both gauge and absolute pressure or without a barometer (CM1) to solely control and measure gauge pressure.

Druck - CM2 PACE Control Module - Premium Accuracy

Accuracy is +/-0.005% full scale plus +/-0.005% reading. It fits into the interior back of the PACE5000 and PACE6000 system chassis, and it can be changed.

Druck - CM3 PACE Control Module - Reference Precision

Accuracy is 0.0033% full scale plus +/-0.0016% reading. It fits into the interior back of the PACE5000 and PACE6000 system chassis, and it can be swapped out.

Druck - 4Sight2 Calibration & Asset Management Software

Use your Google Chrome web browser on any PC or tablet; it provides full visibility of all available assets, instruments, and resources that affect your site.

Starting at:
$2,664.00

Druck - PACE5000 Rack Mount Kit (P/N: IO-RMK-P5000)

Rackmount kit for Druck PACE5000 Pressure Controller

$239.00

Druck - PACE6000 Rack Mount Kit (P/N: IO-RMK-P6000)

Rackmount kit for Druck PACE6000 Pressure Controller

Druck - PACE Adaptors (P/N: IO-ADAPT-1/4NPT and etc.)
Adapters for Druck PACE series Modular Pressure Controllers/Indicators

Starting at: $41.90

Druck - PACE Adaptor Kit (P/N: IO-ADAPTOR-KIT)
Set of 7 adapters for Druck PACE series indicators

$533.00

Druck - Differential Connection Kit Low Pressure (P/N: IO-DIFF-KIT-LP)
Helps reduce the impact of thermal and/or pressure changes in ambient conditions occurring during the measurement cycle.

Druck - Negative Gauge Pressure Generator (P/N: IO-NEG-G-GEN-1)
Used to generate small -ve gauge pressure (Venturi effect) to enable control at zero gauge without the need for a vacuum pump.

Druck - Vacuum System Check Valve Kit (P/N: IO-VAC-SYS)
Allows exhaust pressure to bypass vacuum pump to atmosphere, which improves control performance from any positive pressure downwards.

Druck - Snubber Reference Port (P/N: IO-SNUBBER-1)
Provides a pneumatic time constant to the sensor -ve port, thus attenuating the effect of ambient drafts.

Druck - Diffuser Gas Exhaust (P/N: IO-DIFFUSER-1)
Screws into vent or -ve supply port to diffuse exhaust gas.

Druck - Filter Kit Control Manifold (P/N: IO-FILTER-KIT)
Contains 5 filters for control module pressure ports.