PMC Engineering
PMC Engineering Pressure Sensors measure pressure, level, depth, vacuum and other properties in niche applications.
Product Categories
PMC - MTM3000 Series - Depth and Level Pressure Transmitter
For applications where space is very limited: the housing diameter is 0.39 inches. Available in Stainless Steel or Titanium.
PMC - VL2000 Series - Submersible Wastewater Level Transmitter
Specifically designed for use in wastewater, pump/lift station applications. Available in Stainless Steel or Titanium.
PMC - Smart Hart® for VL2000 Submersible Wastewater Level Transmitters
Field ranging through the Hart® interface permits adjustment to suit the installation application.
The electronics are located away from the process, enabling calibration and range adjustments without exposing personnel to hazardous or extreme locations.
PMC - Sewage Lift Station Kit - SLS01
Specifically designed for use in wastewater, pump/lift station applications. Available in Stainless Steel or Titanium.
PMC - MIN PT/EL CV Series Miniature Flush-Mount Pressure Transmitters
A body diameter of 1" permits installation flush with the inside wall of pipes 2" in diameter or larger. Ranges 10”WC-300psig, Vacuum & Absolute, 1 inch diameter diaphragm
PMC - VersaLine® VL4500 Series - Depth and Level Pressure Transmitter
These submersible transmitters are specifically designed for depth and level measurements of groundwater, wastewater, and sea water. The housing diameter is 0.72 inches, made of Titanium.
PMC - Sink Weight for VL2000 Wastewater Transmitter (P/N: SW2000)
Provides a “cage” sink weight/anchor for VL2000 Series transmitters installed on the bottom of wastewater or sewage lift tanks. 4” high x 4” dia. and approximately 6 lbs.
PMC - Moisture Protection Reference Volume (P/N: MP11)
Provides total isolation of the vent tube from atmosphere by utilization of a custom bladder which changes volume with barometric pressure. Maintenance free.
PMC - TE11 Termination Enclosure
Standard Enclosure with MP-11/DIN Rail Terminals. Lightening protection available. Great field termination for vented gauge pressure transducers and transmitters.
PMC - Sensor Termination Enclosure (P/N: TE10)
Polycarbonate IP65 (NEMA 4X) rated termination enclosure for vented pressure transmitters, uses Dri-Box Desiccant.
PMC - STS ATM.ECO Series Pressure Sensor
The ATM.ECO series is a precision pressure transmitter offering high performance and a rugged flexible design for a wide range of industrial applications.
PMC - STS ATM.1ST Series Precision Pressure Sensor
The ATM.ECO series is a precision pressure transmitter offering high performance and a rugged flexible design for a wide range of industrial applications.
PMC - VersaLine® VL1000 Series Submersible Pressure Transmitter - NPT
These submersible transmitters are fitted with a ¼" NPT female pressure connection as standard, and the housing diameter is 1 inch, made of Stainless Steel, with an option for Titanium.