Aqua TROLL 500 / Aqua TROLL 600 - SPARE/EXTRA SENSORS
Aqua TROLL 500 / Aqua TROLL 600 - SPARE/EXTRA SENSORS
by In-Situ
The table below is a list of all the sensor types that plug into the Aqua TROLL 500 and the Aqua TROLL 600 Multiparameter Sondes. Only four sensors at a time fit into the sonde.
Important: These are for replacement only. Use the configured part number for a complete sonde and sensor configuration.
Sensors:
In-Situ - Aqua TROLL pH/ORP Sensor (P/N: 0063470) The pH/ORP sensor is compatible with the Aqua TROLL 500 and Aqua TROLL 600 multiparameter sondes, featuring a single-junction, three-electrode sensor with refillable reference solution. |
$795.00 | |
In-Situ - Aqua TROLL Temperature and Conductivity Sensor (P/N: 0063460) |
$995.00 |
|
In-Situ - Aqua TROLL RDO Sensor In-Situ offers two types of "Rugged Dissolved Oxygen" probes: 1) RDO-X (P/N: 0063450): Made for rugged environmental conditions 2) RDO Fast Cap (P/N: 0038520): Made fast responding, for spot checking |
$1,195.00 | |
In-Situ - Aqua TROLL Turbidity Sensor (P/N: 0063480) This turbidity sensor provides consistent, accurate turbidity measurement and total suspended solids (TSS) data, eliminating the need for bench top turbidity testing. |
$1,195.00 |
|
Aqua TROLL Ion-Selective Electrode Sensors
There are three Ion-Selective Electrode Sensors available for use with Aqua TROLL 500 and Aqua Troll 600:
|
$745.00 each | |
In-Situ - Aqua TROLL Aqua TROLL Chlorophyll a Sensor (P/N: 0038900) |
$1,995.00 | |
In-Situ - Aqua TROLL Blue Green Algae Sensors |
$1,995.00 | |
In-Situ - Aqua TROLL Rhodamine WT Sensor (P/N: 0038890) |
$1,995.00 | |
In-Situ - Aqua TROLL Fluorescein WT Sensor (P/N: 0096050) The Fluorescein WT Sensor is compatible with the Aqua TROLL 500 and Aqua Troll 600. |
$1,995.00 | |
In-Situ - Aqua TROLL Crude Oil Sensor (P/N: 0096060) The Crude Oil Sensor is compatible with the Aqua TROLL 500 and Aqua Troll 600. |
$1,995.00 | |
In-Situ - Aqua TROLL FDOM Sensor (P/N: 0096070) The FDOM Sensor is compatible with the Aqua TROLL 500 and Aqua Troll 600. |
$1,995.00 | |
In-Situ - Aqua TROLL Sensor Port Plug (P/N: 0063510) The Aqua TROLL 500/600 Port Plug is used in place of a smart sensor on the Aqua TROLL 500/600 Multiparameter Sonde. |
$65.00 |
Sensor Replacement Kits:
In-Situ - Aqua TROLL RDO-X Cap Replacement Kit (P/N: 0079790) Typically, needs to be replaced every 2 years, depending upon conditions. |
$195.00 | |
In-Situ - Aqua TROLL RDO Fast Cap Replacement Kit (P/N: 0066800) Typically, needs to be replaced every year, depending upon conditions. |
$195.00 | |
In-Situ - Aqua TROLL Reference Junction Kit (for pH/ORP and ISE Sensors) (P/N: 0078990) |
$145.00 | |
In-Situ - Aqua TROLL 500/600 Wiper Brush Kit (P/N: 0079810) | $26.00 |