Cart 0


DPI 620 Genii-IS - Intrinsically Safe Multifunction Calibrator - ACCESSORIES
by Druck

Other Components and Accessories

The DPI620 Genii is a modular unit, and these additional items can be added at any time to enhance the features of your unit. Some might be required for the operation of your product, and some may not. We strongly advise that you carefully consider each item for purchase unless you already own a suitable alternative.

Pressure Measurement 

GE Druck PM620-IS Pressure Modules
Innovative and interchangeable pressure modules

Starting at:

Druck - PM620TS - TERPS Intrinsic Safe - High Accuracy Pressure Modules

Total uncertainty = +/-0.0125% FS.  Interchangeable intrinsic safe pressure modules
Starting at:  $2,575.00

GE Druck Pressure Module Carrier  (MC620-IS)
Attaches to the DPI620 Genii-IS allowing it to be a pressure indicator.


GE Druck Pressure Stations  (PV621-IS, PV622-IS, PV623-IS)
Advanced pressure measurement and generation system for the GE Druck DPI620 Genii-IS 

Starting at:


GE Druck USB Cables  (P/N:  IO620-USB-PC and -RS232)
The GE Druck USB cables are used to connect a DPI 620 to a PC or an RS-232 interface. 

Starting at:


Druck - 4Sight2 Calibration & Asset Management Software

4Sight2 is your next generation solution for calibration and asset management and makes calibration management easy to use, cost-effective and scalable. Equally effective for single use or global multi-site operations, this software is designed to empower your organization to operate simply and securely, connecting your people to instruments, data, and enhanced analytics.

Starting at:


GE Druck Spare/Replacement Battery  (P/N:  IO620G-IS-Battery)
Spare/replacement battery for the DPI620 Geni-IS can be charged with battery charging station IO620IS-CHARGER.


 GE Druck Battery Charger  (P/N:  IO620G-IS-CHARGER)

Used for charging a spare battery for the DPI620 Genii-IS


 Cases - Carrying cases, spare cases

Druck Fabric Carrying Case  (P/N:  IO620-CASE-1-IS)
Holds the DPI620 Genii-IS and test leads only.


Druck System Carrying Case  (P/N:  IO620-CASE-2-IS)
Holds the DPI620 Genii-IS, MC620-IS, test leads and up to 4 pressure modules. 


GE Druck Pressure Station Carrying Case (P/N:  IO620-CASE-3-IS)
Holds one PV62X-IS pressure station, a DPI620 Genii-IS, an MC620-IS and test leads.

GE Druck Modular System Transit Case  (P/N:  IO620-CASE-4)
Holds two PV62X pressure stations and DPI620's, MC620, PM620's, test leads, with room for other stuff too.  Pelican Case.


 Accessories - Please consider these optional accessories

GE Druck Blanking Plug  (P/N:  IO620-Blank)
For use with a PV62X pressure station and the Comparator Adaptor.


GE Druck Pressure Adaptor Sets  (P/N:  IO620-NPT and etc)
A set of pressure port test point adaptors to connect to the tool less quick fit connectors of the PV 62X, MC620 and extension hoses, to
the device under test. 

Starting at:

GE Druck Comparator Adaptor  (P/N:  IO620-Comp)
Allows the PV 62X pressure station to be used as a comparator; used with the DPI104 Digital Pressure Indicator (as reference) and another pressure gauge under test (i.e. bourdon-tube type pressure gauge).


GE Druck Hydraulic Hose Kit  (P/N:  IO620-Hose-H1-IS, and H2-IS)
For use with PV623-IS hydraulic pressure station or the MC620-IS pressure module carrier along with the DPI620 Genii-IS.  Comes in 1 meter (3 foot) and 2 meter (6 foot) lengths.

Starting at:

GE Druck Pneumatic Hose Kit  (P/N:  IO620-Hose-P1-IS, and P2-IS) 
For use with PV621-IS and PV622-IS pneumatic pressure stations or the MC620-IS pressure module carrier along with the DPI620 Genii-IS.  Comes in 1 meter (3 foot) and 2 meter (6 foot) lengths. 

Starting at:

GE Druck Pressure Relief Valves  (P/N:  IO620-PRV-XX)
For use with PV62X pressure station to limit the pressure that is generated to a safe level for your application.

Starting at:

GE Druck IDT621 Dirt Mositure Trap  (P/N:  IO620-IDT621)
Dirt moisture trap for PV621 pressure station.  Maximum pressure 20 bar / 300 psi


GE Druck IDT622 Dirt Mositure Trap  (P/N:  IO620-IDT622)
Dirt moisture trap for PV622 pressure station.  Maximum pressure 100 bar / 1500 psi