TEK-FLEX 4100A - SPECIFICATIONS
TEK-FLEX 4100A SERIES GUIDED WAVE RADAR LEVEL TRANSMITTER - SPECIFICATIONS
by Tek-Trol
| Accuracy | Standard: | ±0.08″ (±2mm) (distance ≤ 10m / 33ft) ±0.02% of measured distance (distance > 10m / 33ft) |
| Interface: | ±0.2″ (±5 mm) (distance ≤ 10m / 33ft) ±0.05% of measured distance (distance > 10m/ 33ft) |
|
| Probe Options | Single Rod (Ø1/4″ (Ø8mm)): Single-Piece or Segmented Type; Single Rod (Ø3/8″ (Ø10mm)): Single-piece fully PTFE coated; Single Cable (Ø1/8″ (Ø4mm)) |
|
| Measuring Range | Single-Piece or Single-piece fully PTFE coated: 3.28 to 13.12ft (0.6 to 4m); Segmented: 3.28 to 19.69ft (0.6 to 6m); Single Cable: 3.28 to 196.85ft (1 to 60m) |
|
| Resolution | 0.004” (0.1 mm) | |
| Repeatability | ±0.04” (±1 mm) | |
| Temperature Limits | +59 to + 77°F (+15 to +25°C) | |
| Operating Temperature | -58 to + 482°F (-50 to +250°C); -58 to +302°F (-50 to 150°C) | |
| Ambient Temperature | -40 to + 176°F (-40 to +80°C) | |
| Storage Temperature | -58 to + 185°F (-50 to +85°C) | |
| Pressure Limits | Single fully PTFE-coated: -14.5 to 580psig (-1 to 40barg); Single ceramic process seal system: -14.5 to 1450psig (-1 to 100 barg) |
|
| Humidity | 60% ±15% | |
| Viscosity | 10000mPa·s / 10000cP | |
| Dielectric Constant | ≥1.6 in direct mode (interface: εr(interface) >> εr (level)2) | |
| Material | 316L SS; Hastelloy C; PTFE | |
| Process Connection | Thread, Flange | |
| Output Signal | 4 to 20mA or HART output | |
| Power Supply | 11.5 to 30VDC; 13.5 to 34VDC | |
| Display | LCD display (128 × 64 pixels in 8-step greyscale with 4-button keypad) | |
| Protection Class | IP68; IP66 | |
| Enclosure | NEMA 4x | |
| Approvals | CE, Class l Div 1 | |