Tek-Flo Mass 1300D Series Steam Quality Flowmeter - OVERVIEW

Tek-Flo Mass 1300D Series Steam Quality Flowmeter - OVERVIEW
by Tek-Trol

The Tek-Trol Tek-Flo Mass 1300D Flow Meters combine two different flow meter technologies: vortex and differential pressure. The design has blended the two separate flow metering principles into one hybrid system where the two meters complement each other's performance. This combination allows for predicting the fluid density, volumetric flow rate, and mass flow rate without any fluid density information required from an external source. The meter's ability to measure fluid density provides several valuable outputs. The Tek-Trol Tek-Flo Mass 1300D meter can calculate the density of changing gas mixtures. For example, natural gas is typically a composition of many different gases, which can vary over time and by application. The meter produces a reliable steam quality (dryness) measurement and steam mass flow rate reading in saturated steam service. The meter can provide a reliable liquid loading measurement and gas mass flow rate reading in wet natural gas service. These are a few examples of the unique capabilities of the 1300D Flo-Mass meter. With the addition of two differential pressure transmitters, advanced diagnostic software continually monitors and verifies the meter's performance. The Tek-Trol Tek-Flo Mass 1300D product line has many options and meter configurations to meet your specific application requirements.

FEATURES:

  • Measures fluid density, volumetric flow rate, and mass flow rate without fluid information requirements from an external source
  • In steam service, the meter provides reliable steam quality (steam dryness) and mass flow measurements.
  • Able to calculate the density of changing gas mixtures (For example, natural gas is typically a composition of many different gases, which can vary over time and vary by application.)
  • More cost-effective than current steam quality and wet gas meters on the market
  • Advanced diagnostic software can continually monitor and verify the meter's primary flow element health and confirm output uncertainty.
  • Capable of measuring liquids, gases, and steam
  • Multi-variable options are available for temperature and pressure measurement.
  • Multiple readings from a single installed device reduce initial cost, installation cost, and ownership cost over the instrument's lifetime.
  • Mass flow equations for additional diagnostic information and verification (real gas, ideal gas, AGA 8, API 2540)
  • Energy Monitoring Capable: computes output energy consumption with select fluids, like steam, water, and heat transfer fluids.
  • Easy to install and commission
  • Reliable—no moving parts, no fluid-to-sensor contact
  • Temperature up to 750°F (400°C)
  • Pressure up to 1500 psi
  • Inline is configurable for pipes from 2" to 12" (DN 50 to DN 300).
  • Field-configurable ranges, outputs, and displays
  • Remote electronics are available for use in harsh environments or locations with limited access.
  • HART protocol communications (Standard)
  • Modbus, BACnet, and Power over Ethernet (PoE) communications are available.