Druck - 1800 Series Submersible Pressure Level Sensor Platform

1800 Series Submersible Pressure Level Sensor Platform - OVERVIEW
by Druck

BRIEF SUMMARY OF THE DIFFERENT MODELS:

MORE DETAILS:

• Ranges as low as 2ftH2O (1psi) and as high as 1,968 ft H2O (600 meters H2O)
• Call SensorPros for custom ranges
• Gauge or absolute pressures
• ±0.10% FS BSL accuracy standard, ±0.06% FS BSL available
• Fully welded 17.5 mm (0.689 inch) diameter titanium construction
• Output signal:
• PTX: 4 to 20mA (2-wire)
• PDCR: 25mV for 2ftH2O range; 50mV for 5 and 10ftH2O ranges; 100mV for 20ftH2O range and above
• Long-term stability: ±0.1% FS per annum
• Temperature compensated from -2 to 30°C (28 to 86°F)
• ±0.3% FS Temperature Error Band (TEB) for 10 ftH2O range and above
• Vented polyurethane or Hytrel cable
• ATEX/IECEx Intrinsic Safety approval (optional)
• Range of pressure connections available
• Lightning surge arrestor (optional, PTX version only)
• Full range of installation accessories

1800 Series Submersible Pressure Level Sensor Platform - DESCRIPTION
by Druck

Description of the 1800 Series:

The Druck 1800 Series of Submersible Pressure Sensors are fully submersible high performance pressure sensors for measurement of hydrostatic liquid levels. An advanced micro-machined silicon piezo-resistive pressure sensor provides excellent performance and resistance to shock and vibration. Contained in a slim-line (0.69 inches in diameter) welded titanium body, it is terminated in an injection molded cable assembly. Constructed of all-welded titanium, these sensors are backed by a 5-year corrosion warranty. Their small size is ideal for municipal water supply wells, leachate wells, irrigation projects, canals, rivers, seawater and other similar applications.

All of the 1800 Series Submersible Pressure Sensors offer two levels of accuracy, depending on your needs: ±0.10% BSL and optional ±0.06% BSL (±0.08% FS BSL max. for 1 mH2O and below).

Cable Types:

There are two types of high integrity, waterproof cables available with the 1800 Series Submersible Pressure Sensors:

1. A tough, vented polyurethane cable (PTX 1830, PTX 1835, and PDCR 1830)
2. An equally robust vented Hytrel® 6108 hydrocarbon-resistant cable (PTX 1840, PTX1845, and PDCR 1840)

Both cable types are strengthened with Kevlar so that there is no measurable elongation when the cable is lowered into deep wells. Depending on your application, cable lengths for either the polyurethane or Hytrel cables are available at lengths ranging from 3 feet up to 2,300 feet H2O (1 to 700 meters H2O). The first 3 feet (1 meter) are included as standard; lengths beyond that are extra.

1800 Series Submersible Pressure Level Sensor Platform - DOCUMENTATION
by Druck
Spec Sheets:

Combined into one aggregate data sheet for the 1800 Series, there are no individual product data sheets for the PTX1830, PTX1835, PTX1840, and PTX1845.

• Druck 1800 Series Submersible Pressure Sensor Datasheet (PDF)
• EZ Guide - Depth Level Accessories (PDF) (NOTE: Illustrates accessories' details, although specific part numbers and prices have changed since the document's initial publication in 2014.)

Summary Brochure:

• Druck Depth & Level Summary Brochure (PDF)

Installation Guide:

• Druck PTX1830 Installation Instructions (PDF)

Pressure / Level Application Guide:

This guide needs to be revised with current products; however, it contains much useful fundamental application information for applying submersible depth/level pressure sensors.

• Druck Pressure-Level Application Guide (PDF)

1800 Series Submersible Pressure Level Sensor Platform - ACCESSORIES
by Druck

Please consider these optional accessories:

	Druck - ACCESSORY PACK for 1800 Series Submersible Pressure Sensors (P/N: SO1830E) This accessory pack includes an STE box, cable clamp, slimline sink weight and a direct calibration adapter for the Druck 1800 Series Submersible Pressure Sensor Platform (PTX1830/1835/1840/1845, PDCR1830/1840).	$310.00
	Druck - Sensor Termination Enclosure (P/N: 202-034-05) Simple field termination for vented gauge pressure transducers and transmitters. Prevents water damage caused by moisture or high humidity from forming inside vented gauge pressure sensors.	$189.00
	Druck - Dri-Can Desiccant Pack (P/N: 600-914) Indicates when the desiccant is OK or used. When the color is blue, the desiccant is OK; when it is red, it is time to be replaced. Under normal conditions, the desiccant should be changed every 6 to 12 months.	$30.00
	In-Situ - Level BaroTROLL - Precision Pressure Barometer Barometric Pressure Sensor for use with the 1800 Series Submersible Pressure Sensor: Titanium construction Outputs: 4-20 mA, SDI-12, or ModBus Sub-1 inch diameter for easy fit NIST calibration report Accuracy: +/-0.05 FS from -5 to 50° C (23 to 122° F) Can be used effectively over 3.5 square mile area and altitude delta of 350 feet with negligible effect on correction factor accuracy (subtracting the barometric reading from an absolute submersible pressure sensor).. ELIMINATES THE NEED FOR USING AN STE BOX (PLEASE NOTE: When you specify your submersible pressure sensor to use the absolute pressure reference, you can use a barometer to subtract out the barometric pressure to get you to gauge pressure. This eliminates the need to use a desiccant box.	Starting at: $874.50
	Druck - PTX Cable Clamp (P/N: 192-373-01) Cable Clamp, fits all Druck Submersible Pressure Level Sensor Cable (1800 Series, UNIK5000, and etc.).	$51.20
	Druck - Sinkweights for 1800 Series (P/N: DA2608-1-01 and DA4068-1-01) Sinkweights for Druck 1800 Series Submersible Sensors. Available in two lengths, long and short.	Starting at: $82.30
	Druck - Calibration Adaptors for 17.5 mm Diameter Pressure Sensors For use with the Druck 1800 Series Submersible Pressure Sensor Platform (PTX1830/1835/1840/1845, PDCR1830/1840). The female side of the adaptor is M14 x 1.5 mm-Female, which screws onto the standard pressure port on an 1800 Series Submersible Pressure Sensor (with nose cone removed). The male side of the adaptor is G1/8.	Starting at: $68.70
	Druck - Nose Cone for 1800 Series Submersible Pressure Level Sensors (P/N: 222-127-01) Protects the sensor tip from damage. Made of Delrin® plastic for durability.	$27.50
	Electro-Numerics - Micro Series 1/8 DIN Digital Process Meter The panel meter supplies power to your pressure sensor, and has options for signal re-transmission, output relays, digital interfaces and more. Impressive Update Rate for the Micro-P: 60 times per second to the display, and retransmission update rate is 56 times per second (for 60 herz operation). Meter operates on AC power from 85 to 264Vac.	Starting at: $118.00

1. Please configure your model number by pressing the "Configure Options" button. Move on to step #2.
   PLEASE NOTE: If the "Add to Cart" button appears, that means there are no options to configure, so move on to step #2.
2. After configuration, press the "Add to Cart" button to enter the shopping cart, and then either:

• Select the "Check Out" button to purchase online, OR
• Select the "Request a Quote" button, and we will send you a formal quote within 1 business day.