EdgeTech - Com.Air - Dew Point Monitor for Compressed Air Systems

Com.Air Dew Point Monitor for Compressed Air Systems - OVERVIEW
by EdgeTech Instruments

Standard Features:

• RUGGED housing is designed for challenging manufacturing environments
• Compact (does not take up a lot of space on your work floor)
• Easy and simple to use. Virtually Plug-and-Play
• Readily accessible Chilled Mirror Sensor allows for quick maintenance
• Want to make a change? An entry window allows access to easy adjustments
• Valved flowmeter located on front panel shows sample flow
• Audible alarm with mute switch
• Large, bright LED digital display
• PRIMARY STANDARD MEASUREMENT: Chilled Mirror measurement technique
• NIST Traceable calibration certificate
• Automatic Balance Cycle (ABC) automatically re-standardizes and corrects for contaminants
• MABC: Manual ABC with an easy-access button on front panel
• Two selectable Analog Outputs (4-20 mA , 0–5 VDC scaleable) and an RS-232 Serial Interface
• One programmable, electrically isolated alarm relay
• Universal VAC Power Input

Applications:

• Compressed Air
• Furnace/Heat Treat Applications
• Fluidized Beds
• Dryer Systems
• Plastics: Blow Mold-Injection Mold
• Pharmaceutical Process
• MAP Systems
• Power and Energy Systems

Com.Air Dew Point Monitor for Compressed Air Systems - DESCRIPTION
by EdgeTech Instruments

The COM.AIR dew point monitor is designed by Edgetech Instruments to offer the highest level of reliability and accuracy available in compressed air system dew point measurement. It is equally valued in determining dew point in purge gas systems used in metal heat treating, solder reflow ovens, and purged tunnel processes. The COM.AIR uses the chilled mirror (CM) dew point temperature condensation principle to determine the water vapor concentration in gas mixtures, with a precision platinum resistance thermometer to measure the mirror temperature. The CM uses a thermo-electric device to control the temperature of the mirror and determine dew point. It is a direct measurement of dew point and, thus, a Primary Standard Measurement Technique. The COM.AIR is highly regarded by manufacturing engineers for its robust packaging, accuracy, long life, fast response in detecting upset conditions, and easy-to-use characteristics.

Com.Air is a complete dew point monitoring System. The rugged aluminum NEMA-12 enclosure houses the sensor and control circuitry, as well as flow control, and is easily wall-mounted to conserve space. Only the sample line and power connection are needed for the system to be operational. Com.Air also offers a programmable Automatic Balance Control (ABC) cycle that corrects for the light-reducing effects of mirror contaminants, allowing for continuous monitoring and virtually maintenance-free operation. Several models of chilled mirror sensors are available for the COM.AIR. In most cases, the COM.AIR is fitted with a flow-through sensor, such as the S-Series or X3 series sensors. Gas is extracted from the process point and flows through the sensor for measurement. Depending on the target dew point, choose between a two- or three-stage sensor while deciding if the sensor needs to be air-cooled, fan-cooled, or liquid-cooled. The standard configuration is to mount the sensor onto the face of the COM.AIR unit.

Use of the X3 or the standard S series sensor is determined by the need for chemical resistance (X3), the need for measuring lower dew points without the need for liquid cooling (X3), or the need for the lowest cost (S series).

Remote sensor mounting (locating the sensor away from the electronics) is possible by specifying the insertion D-Probe, the S-series or the X3 series, all with remote cable. The D-Probe can actually be mounted within many processes. The X3 and S series are extractive sampling.

Com.Air Dew Point Monitor for Compressed Air Systems - DOCUMENTATION
by EdgeTech Instruments

• Com.Air Product Data Sheet (App Note) (PDF)
• X3 Chemical Resistant Chilled Mirror Sensor Data Sheet (PDF)

• Com.Air Product Brochure (PDF)
• EdgeTech Instruments SUMMARY BROCHURE (PDF)

Manuals:

• EdgeTech - Com.Air Product Manual (PDF)

Com.Air Dew Point Monitor for Compressed Air Systems - CHILLED MIRROR SENSOR TYPES
by EdgeTech Instruments

Dew Point Sensor (D-type) - OPTIONS:

Edgetech - (P/N -AR) - Aspirator Mount Edgetech - (P/N -P) - Pipe Mount Edgetech - (P/N -F) - Pipe Flange Mount w/ Gasket Edgetech - (P/N -SM) - Surface Wall Mount Edgetech - (P/N -US) - Uni-Strut Mount Edgetech - (P/N -SC1) - Sample Chamber High Pressure (up to 100 psig) Edgetech - (P/N -SC) - Sample Chamber Low Pressure

Com.Air Dew Point Monitor for Compressed Air Systems - ACCESSORIES
by EdgeTech Instruments

	EdgeTech - Filter Kit (Model: FIL) Filter kit: includes fittings and additional elements; rated for 0.1 micron particulate	$185.00
	EdgeTech - Extra Filters (P/N: DX) Additional box of filter elements, quantity 3.	$95.00
	Edgetech - Vacuum Pump Sample Module (P/N: SMU) Used to regulate the flow of gas between 0.5 to 5.0 SCFH (0.25 to 2.4 l/min) across chilled mirror sensors. 115/ 230 VAC powered. Includes On/Off switch, controlled.	$925.00
	EdgeTech - Transport Case (Model: CASE1630) Rugged Transport Case with foam padding.	$795.00

EdgeTech PRODUCT CONFIGURATION - NOTES
by EdgeTech

1. Please configure your model number by pressing the "Configure Options" button.
2. After configuration, press the "Add to Cart" button to enter the shopping cart, and then either:

• Select the "Check Out" button to purchase online, OR
• Select the "Request a Quote" button and we will send you a formal quote within 1 business day or less.