E+E - EE071 Humidity and Temperature Probe with Modbus RTU

******** The Model EE071 is No Longer Manufactured ********

SensorPros recommends the "EE072 Modbus RTU Humidity and Temperature Probe" product line as the replacement sensor

EE071 Humidity and Temperature Probe with Modbus RTU - OVERVIEW
by E+E Elektronik

Key Features:

• Modbus RTU interface
• Highest measurement accuracy
• Excellent protection against pollution and corrosion
• Outstanding long-term stability
• Wide working temperature range
• Temperature compensation
• Easy integration into networks
• Low power consumption
• Compact and easily interchangeable
• Additional physical quantities calculated
• Adjustment and Modbus setup by the user

Typical Applications:

• Stables, incubators, and hatchers
• Storage rooms
• Wireless transmitters
• Data loggers and handhelds

EE071 Humidity and Temperature Probe with Modbus RTU - DESCRIPTION
by E+E Elektronik

The EE071 accurately measures relative humidity and temperature, then calculates physical properties such as dew point temperature, mixing ratio, and absolute humidity.

The Modbus RTU digital interface allows for easy integration into networks. The compact design with an M12 connector facilitates the installation and fast replacement of the probe.

The sensing element has a coating, which protects against pollution and corrosion which results in long-term stability even in harsh environments. With an appropriate radiation shield, the EE071 is also suitable for outdoor applications.

EE071 Humidity and Temperature Probe with Modbus RTU - DOCUMENTATION
by E+E Elektronik

EE060 Humidity and Temperature Probe with Voltage Output - CALIBRATION
by E+E Elektronik

Calibration intervals for E+E Elektronik humidity and temperature sensor products occurs once per year. SensorPros recommends the calibration equipment listed in the table below for following E+E product collections: Humidity-for Process Control, Humidity-Modules & Probes AND Humidity-HVAC Transmitters

Calibration of your E+E Elektronik Relative Humidity Sensors depends on the application and accuracy of the sensor model you have.

	E+E - Humidity Calibration Kit (P/N: HA010400-HA011595) The E+E Humidity Calibration Kit is a cost effective solution for calibrating humidity measuring instruments with sensing probes Ø 10-12 mm (0.4-0.47 inch). It is very easy to use and does not require a highly qualified technical staff. The kit consists of a humidity calibration chamber and a choice of E+E Humidity Standard Sets.	Starting at: $89.00
	Edgetech Instruments - Portable Calibrator - %RH, Dew Point, Temperature (P/N: RH-CAL) Features: Edgetech field proven Optical Chilled Mirror (OCM) technology Completely self-sufficient and portable humidity calibration system Highest accuracy available for both Relative Humidity (RH) and Ambient Temperature (AT): RH Accuracy: ± 0.5% over RH Range: 5% to 95% AT Accuracy: ± 0.2°C over AT Range: 10°C to 50°C Test chamber is temperature and RH controlled independently Accepts standard port sizes for RH probes: 10, 12, 18 mm, 1/2, and 3/4 inch diameter Automatic correction for mirror contaminants Certified measurements against NIST traceable standards Excellent software is available to automate your calibration process	$15,750.00
	E+E - High-precision Humidity Calibrator (P/N: HUMOR 20) Features: Highest accuracy reference device (0.3 - 0.9% RH) Fundamental dual pressure reactor principle Range: 10...95% RH Independent from the ambient temperature Very fast stabilization time: < 3 min/measuring point Automatic multiple point calibration cycles Portable	Starting at: $35,963.00

E+E Elektronik - PRODUCT CONFIGURATION - NOTES

1. Please configure your model number by pressing the "Configure Options" button.
2. After configuration, press the "Add to Cart" button to enter the shopping cart, and then either:

• Select the "Check Out" button to purchase online, OR
• Select the "Request a Quote" button and we will send you a formal quote within 1 business day or less.