E+E - EE08 High Precision Humidity and Temperature Probe

EE08 High Precision Humidity and Temperature Probe - OVERVIEW
by E+E Elektronik

Key Features:

• Accuracy:
• Relative Humidity: ±2%
• Temperature: ±0.36°F (±0.2 °C)
• Measuring Range:
• Relative Humidity: 0 to 100%
• Temperature: -40 to 176°F (-40 to 80°C)
• Outputs:
• Analog: (0-1 Vdc, 0-2.5 Vdc, 0-5 Vdc, or 0-10 Vdc)
• Digital: E2 digital (2-wire) outputs
• Wide working temperature range
• Compact and easily interchangeable
• Low power consumption
• Short start-up time
• Adjustment and outputs are setup by the user

Typical Applications:

• Meteorology, weather stations
• Hatcheries and incubators
• Climatic chambers
• Greenhouses and storage rooms
• Artificial snow machines
• Battery-operated devices

EE08 High Precision Humidity and Temperature Probe - DESCRIPTION
by E+E Elektronik

The EE08 is optimized for accurate humidity and temperature measurement over a wide working range.

The probe has both analog and digital outputs and is available with either cable or M12 connector. It is possible to choose between active and passive temperature measurements.

The probe installs and dismounts easily, thanks to the M12 thread. Low power consumption and short start-up time make the EE08 ideal for battery-operated systems.

For meteorology and other outdoor applications, the EE08 can be used with the optional radiation shield.

With an optional configuration kit, it is possible to adjust the humidity and temperature reading and set up analog outputs.

EE08 High Precision Humidity and Temperature Probe - DOCUMENTATION
by E+E Elektronik

EE08 High Precision Humidity and Temperature Probe - ACCESSORIES
by E+E Elektronik

	SENSOR CONNECTION CABLES:
	E+E Elektronik - Connection Cables (P/N: HA010322-5) M12 connection cable (for connection type E11), available in the following lengths: Length 1.5 m (5 ft) (HA010322) Length 3 m (10 ft) (HA010323) Length 5 m (16.4 ft) (HA010324) Length 10 m (32.8 ft) (HA010325)	Starting at: $114.00
	RADIATION SHIELDS:
	E+E Elektronik - Radiation Shield for EE310 (P/N: HA010502) Radiation shield for Type E8 Probe. With fixed clamping ring (M20x1.5) for probes with Ø12mm (0.47“)	$288.00
	E+E Elektronik - Radiation Shield (P/N: HA010506) Radiation shield for Type E11 Probe (electrical connector M12 plug, 8 poles)	$288.00
	MOUNTING HARDWARE:
	E+E Elektronik - Wall Mounting Clip (P/N: HA010211) Used on all probes with Ø12mm (0.47“).	$10.00
	E+E Elektronik - Protection cap for Ø12 mm (0.47") probes (P/N: HA010783)	$10.00
	E+E Elektronik - M12x1 Flange Coupling 5-Pole (P/N: HA010703) Used with EE08 connection type E11 Probe.	$16.00
	E+E Elektronik - Connector, 8-Pole Socket (P/N: HA010704) Used with EE08 connection type E11 Probe.	$21.00
	SENSOR CONFIGURATOR:
	Product Configuration Software (EE-PCS) For Windows based personal computers. Free download: www.epluse.com/configurator Free EE-PCS Product Configuration Software together with optional adapter (P/N: HA011005) facilitate the configuration and adjustment of the EE08	Free
	E+E Elektronik - EE08 Configuration Cable (P/N: HA011005) E2-interface - RS232 converter for testing purposes and adjustment of the EE08 sensor probe is used together with the EE-PCS configuration software	$694.00

Humidity and Temperature Probe Filter Caps for EE08 - FILTER CAPS
by E+E Elektronik

It might be a good idea in some cases to have spare filters on hand, or you might need a replacement filter. Whatever the reason, select the one you want and add to your cart for purchase!

E+E Elektronik - Metal Grid Filter Cap for 12 mm Probes (P/N: HA010113) Applications: Meteorology, outdoor Climate control Temperature range (-40 to 120°C)

$59.00

EE060 Humidity and Temperature Probe with Voltage Output - CALIBRATION
by E+E Elektronik

Calibration intervals for E+E Elektronik humidity and temperature sensor products occurs once per year. SensorPros recommends the calibration equipment listed in the table below for following E+E product collections: Humidity-for Process Control, Humidity-Modules & Probes AND Humidity-HVAC Transmitters

Calibration of your E+E Elektronik Relative Humidity Sensors depends on the application and accuracy of the sensor model you have.

	E+E - Humidity Calibration Kit (P/N: HA010400-HA011595) The E+E Humidity Calibration Kit is a cost effective solution for calibrating humidity measuring instruments with sensing probes Ø 10-12 mm (0.4-0.47 inch). It is very easy to use and does not require a highly qualified technical staff. The kit consists of a humidity calibration chamber and a choice of E+E Humidity Standard Sets.	Starting at: $89.00
	Edgetech Instruments - Portable Calibrator - %RH, Dew Point, Temperature (P/N: RH-CAL) Features: Edgetech field proven Optical Chilled Mirror (OCM) technology Completely self-sufficient and portable humidity calibration system Highest accuracy available for both Relative Humidity (RH) and Ambient Temperature (AT): RH Accuracy: ± 0.5% over RH Range: 5% to 95% AT Accuracy: ± 0.2°C over AT Range: 10°C to 50°C Test chamber is temperature and RH controlled independently Accepts standard port sizes for RH probes: 10, 12, 18 mm, 1/2, and 3/4 inch diameter Automatic correction for mirror contaminants Certified measurements against NIST traceable standards Excellent software is available to automate your calibration process	$15,750.00
	E+E - High-precision Humidity Calibrator (P/N: HUMOR 20) Features: Highest accuracy reference device (0.3 - 0.9% RH) Fundamental dual pressure reactor principle Range: 10...95% RH Independent from the ambient temperature Very fast stabilization time: < 3 min/measuring point Automatic multiple point calibration cycles Portable	Starting at: $35,963.00

E+E Elektronik - PRODUCT CONFIGURATION - NOTES

1. Please configure your model number by pressing the "Configure Options" button.
2. After configuration, press the "Add to Cart" button to enter the shopping cart, and then either:

• Select the "Check Out" button to purchase online, OR
• Select the "Request a Quote" button and we will send you a formal quote within 1 business day or less.