E+E - EE772 In-Line Thermal Mass Flow Meter

EE772 In-Line Thermal Mass Flow Meter - OVERVIEW
by E+E Elektronik

The EE772 is a thermal mass flow meter for compressed air and gases. Irrespective of pressure and temperature, the EE772 flow meter registers mass flow, volumetric flow or standard flow.

Key Features:

• Gauge mounting block with hot tap valve for rapid installation and removal without flow interruption
• Additional installation of dew point- and pressure sensors
• Remote, interchangeable probe for easy mounting
• Pipe diameter: DN40 - DN80 (1 1/2"-3/4")
• Pressure range up to 40 bar (580 psi) (PN40)
• wide measuring range up to 200 Nm/s (39370 SFPM)
• MODBUS RTU or M-BUS

EE772 In-Line Thermal Mass Flow Meter - DESCRIPTION
by E+E Elektronik

The flow meter can be used effectively to measure the consumption of compressed air, nitrogen, CO2 or other non-corrosive gases.

The gauge mounting block allows for the installation and removal without flow interruption. Regular calibration, without taking into account the device downtime, is therefore always an option. Besides the mass flow probe, the gauge mounting block with hot tap valve can also accommodate a dew point and pressure sensor.

EE772 flow meter employs the well proven E+E hot-film sensor element with high immunity to contamination, which leads to outstanding long-term stability and accuracy, even under harsh operating conditions.

With wide measuring range from 0.5 to 200 Nm/s (100...39370 SFPM) (1:400) and fast response time, one and the same flow meter model can be employed throughout the entire gas supply system. It accurately records even the smallest flow, which represents an essential prerequisite for calculating consumption costs or finding leaks.

Every E+E flow meter undergoes a precise factory calibration procedure at a pressure of 7 bar (102 psi); the corresponding calibration certificate is included in the standard scope of supply. The EE772 flow meter is available with an additional MODBUS RTU or M-BUS (Meter-Bus) interface.

EE772 In-Line Thermal Mass Flow Meter - DOCUMENTATION
by E+E Elektronik

EE772 In-Line Thermal Mass Flow Meter - ACCESSORIES
by E+E Elektronik

	E+E Elektronik - Dew Point Sensor / Transmitter (EE371) In-line dew point sensor with an optional display Auto-calibration, measuring range -76 to 140°F, 360° rotatable enclosure	Starting at: $2,040.00
	E+E Elektronik - Dew Point Sensor / Transmitter (EE355) For industrial drying processes Measurement range -60...60 °C Td (-76...140 °F Td) Included are both Modbus RTU and 4..20 mA outputs	Starting at: $1,584.00
	E+E Elektronik - Sampling cell G 1/2" with Quick Connector (P/N: HA050102)	$337.00
	E+E Elektronink - Quick coupling G1/2“ for gauge mounting block (HA070202)	$19.00
	E+E Elektronik - Inlet and Outlet Pipe Section for Measurement Valve (P/N: HA070215-250)	Startng at: $178.00

E+E Elektronik - PRODUCT CONFIGURATION - NOTES

1. Please configure your model number by pressing the "Configure Options" button.
2. After configuration, press the "Add to Cart" button to enter the shopping cart, and then either:

• Select the "Check Out" button to purchase online, OR
• Select the "Request a Quote" button and we will send you a formal quote within 1 business day or less.