Level TROLL 400 Data Logger & AquaTROLL 100 - ACCESSORIES

Level TROLL 400 Data Logger & AquaTROLL 100 - ACCESSORIES
by In-Situ

Some might be required for the operation of your product, and some may not. We strongly advise that you carefully consider each item for purchase unless you already own a suitable alternative.

In-Situ - Baro TROLL Barometric Pressure Data Logger and Sensor

Barometric Pressure Sensor for use with the In-Situ Level TROLL data loggers records barometric pressure to compensate for changes in water level due to barometric fluctuations. 

  • Titanium construction
  • Outputs:  4-20 mA, SDI-12, or ModBus
  • Sub-1 inch diameter for easy fit
  • NIST calibration report



In-Situ - Rugged Cable Splitter (Vented:  P/N 0095500, Non-Vented:  P/N  0085840)
A cable accessory using the twist-lock connector splits off a single female twist-lock connector, attaching to an In-Situ instrument.


In-Situ - TROLL Cable Extender  (P/N:  0051490)

Used to extend the cable.


In-Situ - Suspension Cable (for Level & Aqua TROLL)
Available in 50 ft (15.24 m), 150 ft (45.72 m), and 300 ft (91.44 m) lengths.
 Prices Start at: $95.00
Use this six-inch Rugged Android 8.1 Device with the VuSitu mobile app and Aqua TROLL instrument for instant data and spot-checking results. This tough and powerful smartphone is IP68 | IP69K rated, which is dustproof/waterproof and high-temperature/high-pressure resistant.

In-Situ - Wireless TROLL Com  (P/N:  0031240)
The Wireless TROLL Com provides wireless communication between a cabled, deployed Aqua TROLL or Level TROLL instrument and a PC/laptop or Android mobile device. Use this Wireless TROLL Com as a replacement for a standard wired TROLL Communication Device. 


    In-Situ - TROLL Com Bundle (P/N:  0052500 or 0052510)
    The TROLL Communication Device comes in two flavors. Both have USB cable and a CD ROM for the software. One model comes with a communication cable and the other has a programming cable. 

    In-Situ - TROLL Battery Pack (P/N  0051450)
    The titanium TROLL Battery Pack supplements internal battery power for frequent fast sampling or long-term deployments with an Aqua TROLL 100/200, BaroTROLL, or Level TROLL 300/400/500/700.


     Level TROLL Miscellaneous Parts:

    In-Situ - Level TROLL Maintenance Kit  (P/N:  0052530)
    Level TROLL Maintenance Kit includes O-rings, dust caps, lube and instructions.


    In-Situ - Replacement Nose Cone  (P/N:  0051130)
    Fits the following models:  Level TROLL 400, 500, 700, Baro, and Aqua Troll 100 and 200.


    In-Situ - ROLL® Shield Antifouling Sensor Copper Nose Cone
    Fits the following models:  Level TROLL 400, 500, 700, Baro, and Aqua Troll 100 and 200.
    In-Situ - Twist-Lock Backshell Hanger (P/N:  0051480)
    Twist-Lock Backshell / Hanger, Titanium (Level TROLL 400 and 700 and BaroTROLL only use non-vented PSIA sensors).