Druck (Pressure Sensors and Instruments)
*** PLEASE NOTE *** SensorPros is authorized to sell Druck products in the USA States of CA, NV, TX, and OK only. For other locations (other states, including foreign countries), please contact the Druck factory at 800-833-9438 or e-mail them at ccpressureusa@bakerhughes.com.
Product Categories
Druck - DPI610E Series Hand-held Pressure Calibrator
The DPI610E handheld pressure calibrator is the latest and the sixth generation of the DPI600 family. Capable of measuring pneumatic pressures from 95% vacuum to 500psi (35bar) and hydraulic pressures up to 15,000psi 1,000bar).
PV624 Portable Pressure Controller (PV62X + PM620 + DPI620GENii)
The PV624 is capable of generating pressures up to 300 psi (20 bar), and when combined with a multifunction calibrator from the DPI620GENii family and a PM620 Pressure Module, you have a portable calibration system. Choose a pressure range from ±1 psig on up to 0 to 300 psi gauge or absolute, with uncertainty from 0.025% span. Use the hand pump to manually generate pressures before the PV624 automatically isolates the hand pump and seamlessly engages the fully automatic pressure generation to your setpoint.
PV624 Portable Low Pressure Controller (PV624 + PM620LP + DPI620GENii)
The PV624 is capable of automatically generating low differential pressures. When combined with a multifunction calibrator from the DPI620GENii family and a PM620LP Low Pressure Module, you have a portable low pressure calibration system. Choose from full scale ranges of ±2.5 mbar (1 inH2O), ±10 mbar (5 inH20), or ±25 mbar (1 to 10 inH2O), with total uncertainty from 0.05% span.
Druck - PM620LP - Low Pressure Modules
Used with the PV624 pressure controller. Ranges from 2.5 mbar diff to 25 mbar diff (1 to 10 inH2O diff), with total uncertainty from 0.05% Span. The PM620LP has a true differential measurement via a fitted barbed low pressure (LP) connector and is supplied with 1 x barbed high pressure (HP) connector to fit a PV624 test port, 1 x equalizing valve, and 1M (3.3 ft) length of silicon twin tubing.
Druck - UNIK5000 (506X) Pressure Sensor (MIL-C-26482)
Stainless Steel body (1" diameter) & MIL-C-26482 Electrical Connector. Electrical Output Type (selectable), either mV, voltage output (0-5, 0-10 Vdc etc), or mA. Choose a pressure connector from a list of 32+ types
Druck - UNIK5000 (507X) Pressure Sensor (DIN 43650)
Stainless Steel body (1" diameter), X = Electrical Output Type (selectable), either mV, voltage output (0-5, 0-10 Vdc etc), or mA. Choose a pressure connector from a list of 32+ types.
Druck - UNIK5000 (50CX) Pressure Sensor (1/2" Conduit, Polyurethane Cable)
Stainless Steel body (1" diameter), X = Electrical Output Type (selectable), either mV, voltage output (0-5, 0-10 Vdc etc), or mA. Choose a pressure connector from a list of 32+ types.
Druck - UNIK5000 (50GX) Pressure Sensor (M12 x 1, 4-Pin Male Connector)
Stainless Steel body (1" diameter), X = Electrical Output Type (selectable), either mV, voltage output (0-5, 0-10 Vdc etc), or mA. Choose a pressure connector from a list of 32+ types.
Druck - 1800 Series Submersible Pressure Level Sensor Platform
Measure hydrostatic liquid levels with this fully submersible, high accuracy sensor with millivolt or milliamp output. 5 YEAR CORROSION WARRANTY.
Druck - DPI620G-H Basic Modular Electrical Calibrator with HART
A cost-effective HART communicator with electrical measurement for pressure calibrations when used with Druck's pressure generation stations, module carriers, and pressure modules.
Druck - DPI620G-B Basic Modular Electrical Calibrator
A cost-effective electrical measurement for pressure calibrations when used with Druck's pressure generation stations, module carriers, and pressure modules.
Druck - DPI610E Aero Portable Aircraft Leak Tester
The DPI610E-A is a portable calibrator for precision leak testing of aircraft pitot-static systems. Configured as a single-channel unit for testing altitude or airspeed parameters, it is fully self-contained and has manual pressure and vacuum generation and venting capabilities.
Druck - REPAIR SERVICE - PACE5000/6000 Chassis
After a thorough health check to determine faults, we will quote you for a fixed-price repair if necessary.
Turnaround time is typically 21 days, and we offer free overnight shipping to and from your location in the USA.
Druck - UPGRADES - PACE Pressure Control Modules
Upgrade Service for all of the PACE Control Modules: change accuracy, pressure range, or add a barometric reference sensor. Turnaround time is typically 21 days, with free overnight shipping to and from your location in the USA.
Druck - REPAIR SERVICE - PACE Pressure Control Modules
Repair Service for all of the PACE Control Modules. Three types of service are available: Minor Repair, Major Repair, or Valve Replacement. Turnaround time is typically 21 days, and we offer free overnight shipping to and from your location in the USA.
Druck - 8000H TERPS Hydrogen-Focused Pressure Sensor
Trenched-Etched-Resonating-Pressure-Sensor, High Accuracy (to +/-0.01% FS). Media-isolated construction, this sensor is suitable for use in harsh environments and hydrogen-rich media.
Druck - 4400T Series Pressure Transducers
The 4400 Series is the latest in the range of products that for many years has been “fine-tuned” in design to suit all chassis and engine pressure measurement requirements.
Druck - 4400 Series Druck Motorsport/Automotive Pressure Transducers
The 4400 Series is the latest in the range of products that for many years has been “fine-tuned” in design to suit all chassis and engine pressure measurement requirements.
Druck - 4200 Series Pressure Sensing Platform
By using digital signal processing, the sensor is optimized for performance over temperature.
Druck - UNIK5000H (502X) Hydrogen Focused Pressure Sensor(Raychem Cable)
Stainless Steel body (1" diameter), X = Electrical Output (ten different types). Multiple pressure connectors, hazardous area certifications, and accuracies. Custom cable lengths.